~TV/monitor

Composite video

 

cord (supplied)

 

S video cord

 

(not supplied)

 

Green

Red

 

Blue

Component video cord (not supplied)

To select progressive scanning mode (see page 17), use COMPONENT jacks.

Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks whichever you want to use.

ŸDigital audio component

OPTICAL

DIGITAL

OUTPUT

Protective cap

Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 40). If setting is incorrect, loud noise may be generated causing damage to the speakers.

!Auxiliary equipment

Red

Stereo audio cord (not supplied)

White

AM/FM antenna

To assemble the AM loop antenna

To connect AM/FM antenna

AM loop antenna (supplied)

Turn it until the best reception is obtained.

FM antenna (supplied)

Extend it so that you can obtain the best reception.

For better AM/FM reception

AM loop antenna (supplied)

Keep it connected.

Vinyl-covered wire (not supplied)

Extend it horizontally.

FM outdoor antenna (not supplied)

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 wire with coaxial type connector (IEC or DIN45325).

Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

English

5

Page 9
Image 9
JVC CA-DXT7, CA-DXT9 manual ~ TV/monitor, Digital audio component, Auxiliary equipment, ⁄ AM/FM antenna