JVC CA-MXDK11 Changing the Display Brightness, Setting the Clock, To select a preset picture tone

Changing the Picture Tone

While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own settings.

To select a preset picture tone

1While playing, display VFP setting screen.

(While holding...) On the TV screen

2Select a preset picture tone.

NORMAL	Normally select this.
CINEMA	Suitable for a movie source.
USER1/USER2	You can adjust parameters and can
	store the settings (see below).

To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained above.

2Select a parameter you want to adjust.

GAMMA	Adjust if the neutral color is bright or
	dark (–3 to +3).
BRIGHTNESS	Adjust if the picture is bright or dark
	as a whole (–8 to +8).
CONTRAST	Adjust if the far and near positions
	are unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

4Repeat steps 2 to 3 to adjust other parameters.

To remove the setting screen, press VFP again while holding SHIFT. The screen will automatically be erased after 9 seconds even if you do not press VFP.

Changing the Display Brightness

You can dim the display window.

(Normal)

(While holding...)

Setting the Clock

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL while holding SHIFT.

1Activate clock setting mode.

•If you have already adjusted the clock before, press the button repeatedly until the clock time starts flashing.

2Adjust the hour, then minute.

To check the current time when the System is turned on

(While holding...)

14