– 26 –English
Auto Edit Recording
By using Auto Edit Recording, you can record the CD tracks
to fit the tape. Auto Edit Recording makes a program by
selecting the CD tracks in numerical order. However, to
prevent the end of the last track on the front side from being
cut off, the last track is selected so as to fit on the remaining
tape length.
On the unit ONLY:
1
Load CDs.
• If the current playing source is not the CD player, press
CD 3¥8 SELECT or CD 1-3 of the tray you want to
edit from, then 7 before going to the next step.
2
Press EDIT.
To change the tape length manually
If the tape length selected is not satisfactory, you can
change the tape length by turning 4 / ¢ on the unit.
You can choose from the following tape lengths — 40, 46,
50, 54, 60, 64, 70, 74, 80, 84 and 90.
3
Press SET/DISPLAY.
• Each time you press the button, the tracks to
be recorded on the front side (“SIDE-A”) and
on the reverse side (“SIDE-B”) alternate.
4
Put a recordable cassette of appropriate
length into deck B.
5
Press REVERSE MODE so that
the Reverse Mode indicator lights
up .
• Without turning on the Reverse Mode
(), recording will stop when the front
side of the tape is recorded.
6
Press CD REC START.
“TAPE SIDE-A STAND-BY” appears,
and the (recording) indicator lights
up on the display.
Deck B starts recording then, about 10 seconds later, the
CD player starts playing.
When the recording is done, “CD REC FINISHED”
appears on the display, and the CD player and deck B
stop.
• If a tape has not been rewound, deck B will rewind the
tape before it starts recording.
• A 10-second blank portion is automatically created at
the beginning of each side of the tape.
To stop during Auto Edit Recording
Press REC START/STOP or 7. So that a 4-second blank
portion is created on the recording tape. (Remember a 4-
second blank is important when using Music Scan — see
page 23.)
To cancel Auto Edit Recording
Press CANCEL/DEMO or 7 before or after play.
The optimum tape length for the disc appears.
Tracks to be recorded on the
reverse side (SIDE-B) appear.
EN24-35.CA-MXGA9V/8V/7V 7/4/03, 3:30 PM26