– 15 –
English

Basic CD Operations

While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press 0 corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD 3¥8 SELECT.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3¥8 SELECT.
To go to another track
Turn 4 / ¢ before or during playback
(or press NEXT ¢ / 4 PREV on the
remote control).
•4:Goes back to the beginning of the
current or previous tracks.
•¢:Skips to the beginning of the
next or succeeding tracks.
If you turn 4 / ¢ (or press NEXT ¢ / 4 PREV
on the remote control) before playing
You can change the tracks continuously.
To locate a particular point in a track
During play, press and hold 1 or ¡
(or NEXT ¢ / 4 PREV on the
remote control).
•1 (or 4 PREV):
Fast reverses the disc.
•¡ (or ¢ NEXT):
Fast forwards the disc.
To go to another track directly using the number
buttons
Pressing the number button(s) on the remote control before or
during play allows you to start playing the track number you
want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
If you press the STOP button while CD/VCD is playing, the total
number of tracks and the total playing time will appear on the
display following by the playing time of the first track. Sometimes,
during the total number of tracks appear on the display, “99” or “00”
will appear for a second before actual track count comes out.
Continued

Playing Back the Entire Discs

— Continuous Play

1
Load CDs.
2

Press one of the disc number

buttons (CD1, CD2 and CD3)

for the disc you want to play.

CD play starts from the first track of the
selected disc and the disc number lamp starts flashing.
• Pressing CD 3/8 SELECT instead of the disc number
buttons starts playing back if a CD is on the trays.
• If no CD is placed on the selected disc tray, “NO DISC”
appears on the display.
To stop playing, press 7.
To remove the disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs* are loaded on the disc trays, they are played in one of
the following sequences.
• When CD1 is pressed: CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed: CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed: CD3 ] CD1 ] CD2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Total Number of Contents (TOC) reading
STOP button does not function during CD changing time and TOC
reading (about 10-20 seconds). You can press STOP button only
after playing time start counting on the display.
Track number Elapsed playing time
Tracks of the currently playing disc
(Track numbers exceeding 16 are not displayed.)
EN14-23.CA-MXGA9V/8V/7V 7/4/03, 3:29 PM15