JVC CA-MXGT91R manual Playing Back CDs CD/CD-R/CD-RW, Loading CDs

Playing Back CDs (CD/CD-R/CD-RW)

This unit has been designed to playback the following CDs:

•CD (Audio CD)

•CD-R (CD-Recordable)

•CD-RW (CD-ReWritable)

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the System.

Loading CDs

On the unit ONLY:

1 Press 0 for the disc tray (CD1, CD2, and CD3) you want to load a CD onto.

The unit automatically turns on and the disc tray comes out.

General Notes

In general, you will have the best performance by keeping your CDs and the mechanism clean.

•Store CDs in their cases, and keep them in cabinets or on shelves.

•Keep the system’s disc trays closed when not in use.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back only if they are already “finalized.”

•You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or the player’s lens is dirty.

•CD-RWs may require a longer readout time. This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0 you have pressed in step 1.

The disc tray closes, and the corresponding disc number lamp and disc indicator light up on the display (CD1, CD2, and CD3).

4 Repeat steps 1 to 3 to place other CDs.

When loading more than one CD continuously

When you press 0for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator flashes while the corresponding CD is being played.

•The disc indicators goes off when the unit has detected that there is no CD on the corresponding disc tray.

– 15 –