![Using a VCR](/images/new-backgrounds/29094/2909431x1.webp)
English
Using a VCR
Listening to a VCR ————————————————————————
By playing the sound from VCR through the
❏First make sure that the optional equipment is properly connected to the
| 1. Set the VOLUME control to 0. |
VCR | 2. Press the VCR button. |
When
3. Start playing the equipment.
4. Adjust the VOLUME control to the desired listening level.
5. Select a sound effect mode, if you wish.
To Cancel the Setting
Change the source by starting any one of the
Recording to a VCR ————————————————————————
To record audio to a VCR, start playback of the recording source of the
❏You cannot record using SEA mode effects.
Reinforcing the Bass Sound
Indicator
The richness and fullness of the bass sound is maintained regardless of how low you set the volume. You can use this effect only for playback.
To get the effect, press the ACTIVE BASS EX. (Active Bass Extension) button. “BASS ON” appears in the display and the indicator lights up.
ACTIVE
BASS EX.
To cancel the effect, press the button again. The message “OFF” appears in the display and the indicator goes out.
Using the Microphone
The
❏ The MIC LEVEL control adjusts the volume for both MIC 1 and MIC 2 at the same time.
❏When you will not be using the microphone, keep the MIC LEVEL control set to MIN, and
disconnect the microphone.
CAUTION: Always set the MIC LEVEL control to MIN when connecting or disconnecting the microphone.
12