English
DISC
DISC
DISC
SET
/
PROGRAM / RANDOM
DISC
DISC
DISC
2. Select a disc with the DISC buttons (1 to 3).
The display changes to the Program Entry display and the disc number and track number sections blink for a few seconds.
Disc Track Step
number number number
CD
PROGRAM
SOUND
MODE
VOL
❏While the display is blinking, perform the operations in steps 3 to 4. When the blinking display changes to the “PROGRAM” display, repeat the operations in steps 2 to 4.
3. Select a track for the program by adjusting the MULTI CONTROL stick left or right.
The track number appears on the display.
CD
PROGRAM
SOUND
MODE
VOL
4. Press the SET/DEMO button.
The blinking disc number and track number changes to a steady light, and the step number is displayed.
CD
6 PROGRAM
SOUND
MODE
VOL
5. Repeat steps 2 to 4 to select the other tracks for the program.
❏ To select another track from the same disc, repeat the procedure from step 3.
6. Press the Ü/8(SELECT) button.
The Unit plays the tracks in the order you have programmed them.
Using the Remote Control
1. Press the PROGRAM/RANDOM button on the Unit.
The message “PROGRAM” appears in the display and the PROGRAM indicator comes on. If you have already created a program, the last step of the previous program is displayed.
CD
PROGRAM
SOUND
MODE
VOL
❏The display changes with each press of the PROGRAM/RANDOM button, as shown below. → PROGRAM → RANDOM → Off (Continuous Play) → (back to the beginning)
2. Select a disc with the DISC buttons
The display changes to the Program Entry display and the disc number and track number sections blink for a few seconds.
Disc Track Step
number number number
CD
PROGRAM
SOUND
MODE
VOL
❏While the display is blinking, perform the operations in step 3. When the blinking display changes to the “PROGRAM” display, repeat the operations in steps 2 to 3.
24