JVC CA-V888T manual Customizing a Sound Mode, Adjust the settings using the Multi Control stick

Customizing a Sound Mode —————————————————————

You can change an existing sound mode to suit your own preferences. These changed setting can be stored in the CA-V888T’s sound mode memory.

1. Select the sound mode you want to change.

2. Press the SEA CONTROL button.

English

SOUND MODE

“SEA CONT” appears on the display, then the low tone section of the tone equalizer is dis- played and the MULTI CONTROL indicators light up to indicate the directions in which you can use the MULTI CONTROL stick. The surround effect of the selected sound mode remains

SEA CONTROL

unchanged.

TIMER/CLOCK

1	2	3	4	1	2	3	4
5	6	7		5	6	7
			SOUND				SOUND
			MODE				MODE
			VOL				VOL

Note: If no adjustments are made for 8 seconds after the SEA CONTROL button is pressed, Sound mode appears on the display then reverts to the previous display.

3.Adjust the settings using the MULTI CONTROL stick.

❏Adjust the level by adjusting the MULTI CONTROL stick up and down.

The level can be set between +3 and –3 in seven steps.

1 2 3 4

5 6 7

SOUND

MODE

VOL

❏Select the tone range by adjusting the MULTI CONTROL stick left and right. You can select LOW, MID, or HIGH tone.

	1	2	3	4
	5	6	7
				SOUND
				MODE
				VOL
SET	4.Press the SET/DEMO button.
/	“MANUAL 1” appears on the display.

SET

1 2 3 4

5 6 7

SOUND

MODE

VOL

5.Select the memory number by adjusting the MULTI CONTROL stick left and right. You can choose from “MANUAL 1” to “MANUAL 3”.

6.Press the SET/DEMO button again.

“MEMORY” appears on the display and the settings are stored in the memory number selected.

SET

/

CD

1 2 3 4

5 6 7

SOUND

MODE

VOL

❏The sound mode is set to the settings you have stored.

❏If you store new settings to a memory number that has already been used, the new settings replace the existing setting.

11