JVC DLA-HD1 Setting Menu, Getting Started Preparation Basic Operation, Settings, English, C Color

ENGLISH

Setting Menu

Item values shown in are factory settings.

zItems that can be configured differ according to the input signals.

Image>Image Adjust

A Contrast

Adjusts the contrast of the projected image. (Black) b30 f 30 (White)

B Brightness

Adjusts the brightness of the projected image. (Darken) b30 f 30 (Brighten)

C Color

Adjusts the color density of the projected image. (Lighten) b30 f 30 (Darken)

D Tint

Adjusts the hue of the projected image. (Red) b30 f 30 (Green)

E Sharpness

Adjusts the outline of the projected image. (Soft) b30 f 30 (Sharp)

F DNR

Adjusts the strength of noise removal of the projected image. (Weak) 0 f 30 (Strong)

zAContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP16)

zATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal.

Image>Color Temp.

G Color Temp.

Sets the color temperature of the projected image.

Low	Select this to give a reddish tinge to the image.
Middle	Select this to have a balanced image.
High	Select this to give a bluish tinge to the image.
	Red	(Less red) b255 f 0 (More red)
User10	Green	(Less green) b255 f 0 (More green)
	Blue	(Less blue) b255 f 0 (More blue)
	Red	(Less red) b255 f 0 (More red)
User20	Green	(Less green) b255 f 0 (More green)
	Blue	(Less blue) b255 f 0 (More blue)

*The red, green and blue colors can be adjusted and registered respectively.

zThis setting can also be configured from the remote control. (pP16)

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

29