ENGLISH
Setup>Profile Memory
L Profile Memory
Registers or deletes image profiles.
| Save User1 | Registers image profile in AUser1B. |
|
|
|
| Save User2 | Registers image profile in AUser2B. |
|
|
|
| Save User3 | Registers image profile in AUser3B. |
|
|
|
| Clear User1 | Returns image profile in AUser1B to factory setting (natural). |
|
|
|
| Clear User2 | Returns image profile in AUser2B to factory setting (natural). |
|
|
|
| Clear User3 | Returns image profile in AUser3B to factory setting (natural). |
|
|
|
| Reset Cinema | Returns image profile in ACinemaB to factory setting. |
|
|
|
| Reset Natural | Returns image profile in ANaturalB to factory setting. |
|
|
|
| Reset Dynamic | Returns image profile in ADynamicB to factory setting. |
|
|
|
zAContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage ProfileB.
Setup>Picture Position
M Picture Position
Adjusts the horizontal/vertical position of the projected image.
zThe display position value varies with the input signal.
zThis adjustment is available only for analog input signals.
Setup>HDMI Input Level
N HDMI Input Level
Configures the input level setting of the HDMI input terminal.
StandardFor normal circumstances, select this setting.
Getting Started
Preparation
Basic Operation
Enhanced
Select this setting when the
Settings
zThis setting is available only when projecting the HDMI input.
Setup>Mask
OMask
Masks (Hides) the outer area of the projected image.
| 2.5% | Masks 2.5 % of the screen. |
|
|
|
| 5% | Masks 5 % of the screen. |
|
|
|
| Off | No masking. |
|
|
|
zMasking is available only when high definition images are input.
Video>COMP
P COMP
Configures the input signals of the component video input terminals.
| Y Pb/Cb Pr/Cr | Select this when component video signals are input. |
|
|
|
| RGB | Select this when RGB video signals are input. |
|
|
|
| SCART | Select this when RGB video signals and sync signals are input from SCART plug for |
| European market. | |
|
| |
|
|
|
zThis setting is available only when projecting the component video input.
Troubleshooting
Others
31
