4 
Settings
Setting Menu (Continued)
Install.>High Altitude Mode
a High Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On
Off
Activate.
Do not activate.
Func.>Back Color
b Back Color
Configures the screen color displayed when there is no input signal.
Blue
Black
Sets screen color to ABlueB.
Sets screen color to ABlackB.
Func.>Sleep Timer
c Sleep Timer
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15
30
60
Off
Switch to standby mode after 15 minutes.
Switch to standby mode after 30 minutes.
Switch to standby mode after 60 minutes.
Do not switch to standby mode.
Func.>D-ILA Logo
d D-ILA Logo
Sets whether to display
On
Off
Displays for 5 seconds.
Do not display.
Func.>Lamp Power
e Lamp Power
Configures the output of the
Normal
High
For normal circumstances, select this setting. (170 W)
Select this when it is difficult to see the image in a bright room. (200 W)
zChanging the lamp power will not change the lamp time (lamp life).
zThe setting cannot be changed within approximately 90 seconds after this unit has been turned on.
zSettings cannot be changed within approximately 60 seconds after they are made.
Func.>Test Pattern f Test Pattern
Displays 6 types of test patterns.
zThis can also be displayed from the remote control. (pP16)
34
