5 
Troubleshooting
Replacing the Lamp (Continued)
STANDBYON
LENSINPUT
INFO LENS.AP ASPECT
GAMMA C.TEMP
COLOR TINT N.R
BRIGHT CONT SHARP
TESTHIDE
MENUBACK
CINEMA1 CINEMA2
NATURAL STAGE DYNAMIC
USER1 USER2 USER3
LIGHT
WARNING
Resetting Lamp Time
After replacing the lamp, reset the lamp time.
1Insert the power plug to the power outlet
Light on (Red)
2Must operate with the remote control in the standby mode (the projector is powered, but is not turned on).
●Press in the order as shown.
●Press each button within
BACK | HIDE |
Press for 2 seconds or more
●[STANDBY/ON] indicator and [LAMP] indicator blink alternately for
3 seconds. After that, the unit switches to standby mode.
LAMP
STANDBY/ON
CAUTION
●Reset the lamp time only when you have replaced the lamp.
●Never reset the service time when the lamp is still in use. Otherwise, the approximate standard for gauging replacement time may be inaccurate and lamp blowout may occur.
50
