JVC DLA-S15U Select the video input to be projected, Basic Operations Cont, English, Attentions

Basic Operations (Cont.)

■ Projector’s buttons 2. Select the video input to be projected

STAND BY

OPERATE

LAMP

TEMP

EMERGENCY

VIDEO	VIDEO button
COMPUTER	COMPUTER button

■Press the VIDEO button or the COMPUTER button to switch the input.

•Each time you press either button, the selected input changes as follows.

■ When you press VIDEO:

Y/C VIDEO Y,PB/B-Y,PR/R-Y

■When you press COMPUTER:

COMPUTER 1 COMPUTER 2

Remote control unit Projector

SETTING	COMPUTER VIDEO
	VIDEO

+3

QUICK	COMPUTER
ALIGN.
-2
Screen display
V I D E O	N T S C ( 4 8 0 i )

■Remote control unit

* When the input is switched, the line display (ex. VIDEO) and

the source display (ex. NTSC(480i)) are shown on the upper

part of the screen (they disappear in about five seconds).

However, they will not be shown if LINE DISPLAY in “Setting

and Adjusting Other Functions (OPTIONS)” on page 43 is set

OPERATE COMPUTER VIDEO

VOL.	FOCUS
PAGE	MENU/ENTER
BACK
PRESET
QUICK	AV
ALIGN.	MUTING

COMPUTER button

VIDEO button

to OFF.

(For setting the source, see page 46.)

Note

• To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

ENGLISH

ATTENTIONS

•DO NOT give any shock to this projector while operating it; otherwise, the light-source lamp goes off (the EMERGENCY indicator lights up).

If the shock turns off the light-source lamp —

Turn off the power by pressing the MAIN POWER switch, then turn it on again. Now you can operate the projector as usual.

27