JVC DLA-S15U manual Adjusting Picture Quality Cont, Make adjustment with the cursor, button 2 or

Operating the Main Menu (Cont.)

Adjusting Picture Quality (Cont.)

■ Remote control unit				5 Make adjustment with the cursor
				button 2 or 3.
			MENU/ENTER	■ For video system input
				• To adjust multiple items, repeat steps 4 and 5.
			button	• To reset all items (to factory-set adjustment values “0”), select
OPERATE	COMPUTER VIDEO
				ALL RESET with the cursor buttons and press the MENU/
				ENTER button.
				• To reset only the selected items (ALL RESET excluded) to
VOL.	FOCUS			the factory-set adjustment value, press the remote control’s
				PRESET button. The selected item is reset to the factory-set
	MENU/ENTER			adjustment value.
PAGE
BACK				Adjustment item	Button	Adjustment content
					2	Gets darker.
				BRIGHTNESS		(–30 ← 0 ← +30)
PRESET						Gets brighter.
		Cursor buttons			3
						(–30 → 0 → +30)
QUICK		AV			2	Gets lower.
ALIGN.	MUTING			CONTRAST		(–30 ← 0 ← +30)
						Gets higher.
					3
						(–30 → 0 → +30)
					2	Gets softer.
				SHARPNESS		(0 ← 7)
PAGE BACK button						Gets sharper.
					3
						(0 → 7)
					2	Gets softer.
				COLOR		(–30 ← 0 ← +30)
■ Submenu items						Gets deeper.
					3
						(–30 → 0 → +30)
	[PICTURE menu]				2	Gets reddish.
				TINT		(–30 ← 0 ← +30)
						Gets greenish.
	P I C T U R E				3
	( N T S C ( 4 8 0 i ) )					(–30 → 0 → +30)
	B R I G H T N E S S		0		MENU/	Resets all adjustment values of
	C O N T R A S T		0	ALL RESET	ENTER	items on the PICTURE menu to
	S H A R P N E S S		3
	C O L O R	–	3			the factory-set values (0).
	T I N T		1
	A L L R E S E T
				Notes

•The adjustment item, TINT, is displayed only for NTSC system. It is not displayed (cannot be adjusted) when PAL or SECAM system signals are input.

•When video signals are input to the COMPUTER IN-2 terminal, adjustment items “COLOR” and “TINT” are indicated but cannot be adjusted.

Notes

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

•Adjustment items (on the PICTURE menu) are different when AV signals are input and when computer-related signals are input.

■For computer system input

•To adjust multiple items, repeat steps 4 and 5.

•To reset all items (to factory-set adjustment values “0”), select ALL RESET with the cursor buttons and press the MENU/ENTER button.

•To reset only the selected items (ALL RESET excluded) to the factory-set adjustment value, press the remote control’s PRESET button. The selected item is reset to the factory-set adjustment value.

(To be continued on the next page)

40