SAFETY FIRST EN 3

 

 

 

 

 

 

 

The STANDBY/ON A button does not completely shut off

 

ATTENTION:

mains power from the unit, but switches operating current on and

 

8 Using a mobile phone in the vicinity of the unit may cause

off. ABB shows electrical power standby and ACB shows ON.

 

picture vibration on the TV screen or change the screen to a

 

 

blue back display.

 

When the equipment is installed in a cabinet or a shelf, make sure

 

8 Some TVs or other appliances generate strong magnetic

 

fields. Do not place such appliances on top of the unit as it

that it has sufficient space on all sides to allow for ventilation (10

 

 

may cause picture disturbance.

cm or more on both sides, on top and at the rear).

 

 

8 When moving the product, press A to turn off the power,

When discarding batteries, environmental problems must be

 

and wait at least 30 seconds before unplugging the power

considered and the local rules or laws governing the disposal of

 

cord. Then, wait at least 2 minutes before moving the

 

product.

these batteries must be followed strictly.

 

 

8 If there is a power outage when using the unit, the recorded

Failure to heed the following precautions may result in

 

 

data may be erased.

damage to the unit, remote control or disc.

 

8 It is recommended to back up discs which contain important

1. DO NOT place the unit ^

 

recordings periodically (every few years). As digital signals

^ in an environment prone to extreme temperatures or humidity.

 

do not deteriorate, failure to play back or record might arise

 

due to the effects of the disc aging through the years

^ in direct sunlight.

 

 

depending on the storage environment.

^ in a dusty environment.

 

 

8 Recorded programmes and data cannot be restored once

^ in an environment where strong magnetic fields are generated.

 

 

the disc or tape is damaged.

^ on a surface that is unstable or subject to vibration.

 

 

 

 

 

 

 

 

 

 

 

 

2. DO NOT block the unit’s ventilation openings or holes.

 

 

 

 

 

 

(If the ventilation openings or holes are blocked by a newspaper

 

IMPORTANT

or cloth, etc., the heat may not be able to get out.)

 

Connection to the mains supply in the United Kingdom.

3. DO NOT place heavy objects on the unit or remote control.

 

 

DO NOT cut off the mains plug from this equipment.

4. DO NOT place anything which might spill on top of the unit

 

 

If the plug fitted is not suitable for the power points in your home

or remote control.

 

 

or the cable is too short to reach a power point, then obtain a

(If water or liquid is allowed to enter this equipment, fire or

 

 

proper safety approved extension lead/adapter or consult your

electric shock may be caused.)

 

 

dealer.

5. DO NOT expose the apparatus to dripping or splashing.

 

 

In the unlikely event of the plug fuse failing be sure to

6. DO NOT use this equipment in a bathroom or places with

 

 

replace the fuse only with an identical approved type, as

water. Also DO NOT place any containers filled with water or

 

 

originally fitted, and to replace the fuse cover. If the fuse

liquids (such as cosmetics or medicines, flower vases, potted

 

 

fails again consult your nearest JVC dealer.

plants, cups, etc.) on top of this unit.

 

 

If nonetheless the mains plug is cut off remove the fuse and

7. DO NOT place any naked flame sources, such as lighted

 

 

dispose of the plug immediately, to avoid a possible shock

candles, on the apparatus.

 

 

hazard by inadvertent connection to the mains supply.

8. AVOID violent shocks to the unit during transport.

 

 

If this product is not supplied fitted with a mains plug then follow

 

 

MOISTURE CONDENSATION

 

the instructions given below:

 

DO NOT make any connection to the Larger Terminal coded E or

Moisture in the air will condense on the unit when you move it from

 

 

Green.

a cold place to a warm place, or under extremely humid

 

 

The wires in the mains lead are coloured in accordance with the

conditions^just as water droplets form on the surface of a glass

 

 

following code:

filled with cold liquid. In conditions where condensation may occur,

 

 

 

 

 

 

 

disconnect the unit’s power plug from the wall and keep it

 

 

 

 

Blue to N (Neutral) or Black

disconnected for a few hours to let the moisture dry, then turn on

 

 

 

 

Brown to L (Live) or Red

 

 

 

 

the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

DISCLAIMER OF LIABILITY

 

If these colours do not correspond with the terminal

JVC shall not be liable for any loss relating to the unit’s failure to

 

identifications of your plug, connect as follows:

properly record, store or playback any content (video, audio or

 

Blue wire to terminal coded N (Neutral) or coloured Black.

otherwise) for any reason whatsoever. Any applicable warranties

 

Brown wire to terminal coded L (Live) or coloured Red.

shall only cover replacement or repair of the effected unit, and shall

 

If in doubt — consult a competent electrician.

not apply to recovery or replacement of lost content.