84 EN TROUBLESHOOTING
On-screen Message (HDD & DVD Deck Only)

 

 

 

UNREADABLE DISC

 

 

CHECK DISC

DISC NOT REGISTERED IN THE LIBRARY

 

● When an incompatible disc is loaded, I has been pressed.

REGISTER DISC?

 

 

(A pg. 7)
● A disc that is not registered in the library has been inserted.

 

 

 

COULD NOT FORMAT THE DISC

Register the disc as necessary. (A pg. 56)

 

 

CHECK THE DISC

 

 

INSERT DISC XXXX

 

● Formatting is not complete since the disc may be dirty or
● Appears when a title that has been selected in the library is not

 

damaged. Take out the disc, clean it and retry. (A pg. 10, 78)
contained in the loaded disc.

 

 

 

CAN NOT FINALISE THIS DISC

 

 

CAN NOT RECORD OR MAKE PLAY LIST

 

● Finalising is not complete since the disc may be dirty or

DELETE UNWANTED TITLES

 

 

damaged. Take out the disc, clean it and retry. (A pg. 10, 79)
● Recording and/or editing cannot be performed.

 

 

 

CAN NOT CANCEL FINALISATION OF THIS DISC

● The number of titles exceeds 99.

 

● The number of play lists exceeds 99.

 

● Cancelling disc finalisation is not complete since the disc may be

 

 

dirty or damaged. Take out the disc, clean it and retry. (A pg. 10,

SET CLOCK BEFORE TIMER PROGRAMMING

79)
● To set the timer programme, the clock must be set in advance.

 

 

 

PRESS [STOP] AGAIN TO STOP RECORDING

(A pg. 77)

 

 

 

● During Live Memory playback, o has been pressed. (A pg. 44)

PROGRAMME FULL

 

 

DELETE UNWANTED TIMER PROGRAMMES

 

TIMER RECORDING COMPLETED

 

 

 

●You can programme this unit to timer record as many as 16 programmes. To programme more, you need to cancel a timer programme already set. (A pg. 49)

DISC NOT LOADED

●Operation has been attempted when a disc is not loaded, or loaded upside down. (A pg. 9)

DISC NOT RECORDABLE

INSERT RECORDABLE DISC

●When a playback-only disc or a finalised disc is loaded, R has been pressed. (A pg. 6)

PLUSCODE NO. ERROR

CONFIRM PLUSCODE NO. THEN RETRY

●An invalid PlusCode number has been input. (A pg. 46)

GUIDE PROGRAM IS NOT SET

SET GUIDE PROGRAM THEN RETRY

●To set the timer programme using the VIDEO Plus+ system, the Guide Programme Number must be set in advance. (A pg. 74)

CAN NOT SET VIDEO PLUS+ TIMER PROGRAMMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING

●Appears when you tried to input a PlusCode number during timer recording or instant timer recording.

REGION CODE ERROR

CHECK DISC

●Timer recording has finished during Live Memory playback.

PLAYBACK WILL STOP

THEN TIMER RECORDING WILL START

●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.

COPY PROHIBITED

CAN NOT RECORD

●An attempt has been made to record copy-protected contents.

●An attempt has been made to record copy-once contents on a disc that is not CPRM compatible, such as DVD-R.

COPY PROHIBITED

CAN NOT PLAY

●The unit has detected invalid contents at the start or in the middle of playback.

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED

MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON

●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.

●Check the connection. (A pg. 61)

●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. (A pg. 7)