BASIC OPERATIONS ON DVD DECK EN 35

Recording Features

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

●Press DV/HDD/DVD SELECT on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit.

DV/HDD/DVD

SELECT

DVD lamp

R

CABLE/SAT

TV

DVD

TV AV / VIDEO

Instant Timer Recording (ITR)

This easy method lets you record for 30 minutes to 6 hours (selectable in 30-minute intervals), and shuts the unit off after recording is finished.

1Press R on the unit to start recording.

2Press R again to engage the ITR mode.

●On the front display panel, A0:30B appears.

3If you want to record for more than 30 minutes, press R to extend the time. Each press extends recording time by 30 minutes.

NOTES:

●You can only perform ITR using the R button on the unit.

●ITR is not possible during timer recording.

●When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit automatically performs ARelief RecordingB (A pg. 48).

Watch Another Programme While Recording On The Unit

While recording is going on, you can watch another programme on the TV by using the TV’s tuner.

NOTE:

REMAIN

DVD

PR+/-

DISPLAY

It is required that the remote control is set to be able to operate the TV in advance. (A pg. 68)

1During recording, press TV AV/VIDEO to select TV mode.

●Video mode is disengaged, and the VIDEO indicator on the front display panel lights off.

VIDEO indicator lights off.

●The programme received on the TV’s tuner is displayed on the TV screen.

2Slide the TV/CABLE/SAT/DVD switch to TV.

3Press PR +/– repeatedly to select the desired channel.

Elapsed Recording Time And Disc Remaining Time Indication

During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.

●Each time you press DISPLAY, the time indication changes as follows:

Elapsed recording time N Disc remaining time N Clock N (Back to the beginning)

●You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress. The list of disc remaining times for all recording modes appears on the TV screen.