JVC DR-DX5SEK NOTE:, NOTES:, ATTENTION:, Recording Mode, Pause recording on HDD deck, BASIC OPERATIONS ON HDD DECK EN, deck, Press, Press, Pressing, can be made

		BASIC OPERATIONS ON HDD DECK EN 37
	Basic Recording	NOTES:
		● Continuous recording for over 48 hours is not possible.
		● It is not possible to record on both DVD and HDD simultaneously.
		● It is not possible to record from this unit’s built-in tuner to the DV
● Turn on the unit.
		deck.

●Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.	Pause recording on HDD deck
	It is not possible to pause recording. Pressing W initiates Live
ATTENTION:	Memory Playback.
	However, it is still possible to pause recording only when recording
The HDD on the unit requires approximately 20 seconds to start
	the channels of external sources (AL-1B, AL-2B, AF-1B, and ADVB).
up after the unit has been turned on, during which no operation
	While holding R, press W on the remote control. To resume
can be made.
	recording, while holding R, press I on the remote control.
	No operation can be made with the buttons on the unit.

	DV/HDD/DVD		REC MODE
HDD lamp		SELECT

PR +/-	o R
CABLE/SAT
TV	DVD
HDD
0-9
PR+/-
ENTER

I
o
R	W

Recording Mode

MPEG2 format is used as recording format. As a guide for picture quality, the AbpsB unit is used to represent how much data can be recorded per second. The larger this value is, the better the picture quality becomes but more capacity is required for the recording.

Select XP or SP for programmes where quick movement occurs, such as sports programmes, and LP or EP for talk shows, etc. with relatively less movement.

Recording mode	Maximum recording time (approx.)
XP	53 hours
SP	109 hours
LP	218 hours
EP	328 hours
FR480	473 hours

●For details on FR mode, refer to AFree Rate FunctionB (A pg. 36).

NOTE:

The maximum recording time stated in the above table are the approximate time under unused condition.

REC MODE

1Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on the remote control so that the HDD lamp lights up on the unit.

2Press PR +/– or the number keys to select the channel you wish to record.3Press REC MODE repeatedly to select the recording mode, then press ENTER.

●Each time you press REC MODE, the recording mode changes as follows:

XP N SP N LP N EP N FR (60-360*, 420, 480) N (Back to the beginning)

*The value is selectable from 1 to 6 hours in 5-minute intervals by pressing DErepeatedly after selecting AFR60–FR360B. To change the value in 30-minute intervals, press and hold DE.

●For details on the recording mode, see the right column.

4Press Ron the unit to start recording. Or while holding R, press I on the remote control.

●The HDD recording lamp lights up on the unit.5Press o twice to stop recording.

●Pressing o once displays the confirmation message to stop recording. Press o again to terminate recording.