JVC DR-DX5SEK Auto Channel Set/Auto Clock Set/Auto Guide, Programme Number Set, DVD, DVD, DVD, ENTER, TV/CABLE/SAT/DVD, INITIAL SETTINGS EN, 2 Press selection keys to

Auto Set Up			INITIAL SETTINGS EN 19
		● The TV aerial cable should be connected to the unit.
		Before starting, make sure of the following:
Auto Channel Set/Auto Clock Set/Auto Guide		● The unit’s mains power cord should be connected to a mains
		outlet.
Programme Number Set		● Turn on the TV and select the AV mode.
		● Slide the TV/CABLE/SAT/DVD switch to DVD.
After the A button on the unit (or DVD A on the remote		1 Press A on the unit or DVD A on the remote control to turn
control) is pressed for the first time to turn on the unit, the Auto		on the unit. The AUTO SET/T-V LINK display appears on the TV
Set Up function sets the tuner channels, clock and Guide		screen.
Programme numbers automatically.		2 Press selection keys to	INITIAL SET UP > AUTO CH SET
		select AAUTO SETB, then
		press ENTER. The AUTO
		SET screen will appear.		AUTO SET	T-V LINK
		● When AUTO SET is
		completed, ASCAN
		COMPLETEDB appears on	SET UP	ENTER SELECT WITH @ THEN PRESS [ENTER]
		the TV screen. Select AOKB.
			EXIT	SELECT
				PRESS [SET UP] TO EXIT
A
			INITIAL SET UP > AUTO SET
CABLE/SAT
TV	DVD
				AUTO SET
				PLEASE WAIT...
DVD A
				CANCEL
			SET UP	ENTER SELECT WITH @ THEN PRESS [ENTER]
			EXIT	PRESS [SET UP] TO EXIT
				SELECT

ENTER

Selection Keys

FGDE

ATTENTION:

AAUTOB blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows A– –:––Bas illustrated on page 21.

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (A pg. 18) and the TV is turned on, the unit automatically performs the Preset Download

(A pg. 20) even if you select AAUTO SETB for Auto Set Up function.

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Programme numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Tuner setting (A pg. 74)

●Clock setting (A pg. 77)

If a new station starts broadcasting in your area, perform tuner setting. (A pg. 74)

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●Auto Clock Set may not function properly depending on the reception condition.

After AAuto Set UpB is completed, perform AMonitor SetB on page 23.