Service & Warranty, Cut/Sever Hazard | Friedrich 920-075-13 (1-11)

SERVICE & WARRANTY

SERVICING / CHASSIS QUICK CHANGEOUTS

THE CHASIS IS DESIGNED FOR QUICK DISCONNECT AND CHANGE OUT. FOR MINOR ELECTRICAL SERVICE, THE CONTROL BOX COVER LIFTS STRAIGHT UP AFTER THE SCREWS & DISCONNECT HEAD ARE REMOVED. FOR MAJOR ELECTRICAL, REFRIGERATION AND FAN SERVICE THE CHASSIS MAY BE REMOVED FROM UTILITY CLOSET.

WARNING

Electrical Shock Hazard

Pull out electrical disconnect on front of the chassis and turn off all power to unit before servicing.

Failure to do so can result in property damage, personal injury and/or death.

ROUTINE MAINTENANCE

PERFORMING ROUTINE MAINTENANCE

WITH THE PROPER MAINTENANCE AND CARE, YOUR SYSTEM WILL OPERATE ECOMOMICALLY AND DEPENDABLY. MAINTENANCE CAN BE ACCOMPLISHED EASILY BY REFERRING TO THE FOLLOWING DIRECTIONS. HOWEVER, BEFORE PERFORMING ANY MAINTENANCE, SEE ABOVE STATED WARNING.

CAUTION

Cut/Sever Hazard

SOME EDGES MAY BE SHARP, USE GLOVES

OR OTHER HAND PROTECTION WHEN HANDLING

UNIT.

FAILURE TO DO SO CAN RESULT IN MINOR TO

MODERATE PERSONAL INJURY.

REPLACE AIR FILTER

A DIRTY AIR FILTER REDUCES THE EFFICIENCY OF YOUR VERT-I-PAK AND ALLOWS LINT AND DIRT TO ACCUMULATE ON THE INDOOR-AIR COIL. LINT AND DIRT ON THE INDOOR-AIR COIL CAN DAMAGE YOUR UNIT.

THE AIR FILTER SHOULD BE REPLACED AS IT BECOMES DIRTY. TO REPLACE THE FILTER (CHASSIS MOUNTED RETURN AIR FILTER):

1.SLIDE THE FILTER CLEAR OF THE FILTER RAILS.

2.REMOVE THE FILTER.

3.INSTALL NEW DISPOSABLE FILTER.

NOTE: DO NOT OPERATE YOUR SYSTEM WITHOUT A FILTER IN PLACE OR BLOCK THE FRONT OF THE UNIT RETURN AIR OPENING.

TO REMOVE THE CHASSIS FROM THE CLOSET:

A.SWITCH THE WALL THERMOSTAT OFF.

B.PULL THE POWER DISCONNECT LOCATED IN THE FRONT OF THE CHASSIS.

C.DISCONNECT THE POWER COMING INTO THE UNIT FROM THE MAIN BREAKER PANEL OR THE CLOSET MOUNTED DISCONNECT.

D.DISCONNECT THE ELECTRICAL CONNECTION.

E.DISCONNECT THE DUCT WORK.

F.SLIDE THE CHASSIS OUT OF THE WALL PLENUM.

G.LIFT THE CHASSIS OUT OF THE UTILITY CLOSET.

INSPECT AND CLEAN INDOOR-AIR COIL

EVENTUALLY, MINOR AMOUNTS OF LINT AND DIRT MAY PASS THROUGH THE FILTER AND COLLECT ON THE INDOOR-AIR. THESE MINOR ACCUMULATIONS CAN BE CAREFULLY VACUUMED AWAY WITH A BRUSH ATTACHMENT ON A VACUUM CLANER. CARE MUST BE TAKEN TO AVOID BENDING THE ALUMINUM FINNS ON THE COIL. BENT FINS SHOULD BE STRAIGHTENED USING A SPECIAL FIN TOOL AVALABLE FROM MOST HVAC SUPPLY DEPOTS.

INSPECT OUTDOOR-AIR (OA)INTAKE AND EXHAUST

THE UNIT’S OUTDOOR-AIR INTAKE AND OUTDOOR-AIR EXHAUST PATHS MUST REMAIN CLEAR. CHECK THE OA EXHAUST FREQUENTLY. KEEP IT FREE OF ALL DEBRIS, SNOW, OR ICE. THE OA INTAKE SHOULD ALSO BE KEPT FREE OF OBSTRUCTIONS. BLOCKING THE OA EXHAUST OR OA INTAKE OPENING WILL REDUCE THE EFFICIENCY OF YOUR UNIT AND COULD DAMAGE IT.

INSPECT AND CLEAN CONDENSATE DRAIN

THE CONDENSATE DRAIN MUST BE ROUTED TO A SUITABLE DRAINAGE AREA. CHECK THE UNIT CONDENSATE DRAIN PERIODICALLY. KEEP IT FREE OF ANYTHING THAT MAY BLOCK OR IMPEDE THE FLOW OF CONDENSATE WATER. IF THERE IS ANY ACCUMULATION OF FOREIGN MATTER IN THE DRAIN PIPE, IT SHOULD BE REMOVED AND CLEANED. THE ENTIRE DRAIN LINE MUST BE PROTECTED FROM FREEZING.

WARRANTY

ALL WARRANTY SERVICE WORK MUST BE DONE BY AN AUTHORIZED SERVICER. SEE PRODUCT WARRANTY, AND CONSULT YOUR DEALER OR CONTRACTOR FOR DETAILS.

ELECTRONIC CONTROL ERROR CODE DIAGNOSTICS AND TEST MODE

ERROR CODE DIAGNOSTICS

THE VPAK ELECTRONIC CONTROL CONTINUOUSLY MONITORS THE VERT-I-PAK UNIT OPERATION AND WILL STORE ERROR CODES IF CERTAIN CONDITIONS ARE WITNESSED. IN SOME CASES THE UNIT MAY TAKE ACTION AN SHUT THE UNIT OFF UNTIL CONDITIONS ARE CORRECTED.

TO ACCESS THE ERROR CODE MENU PRESS THE 'ENTER' BUTTON. IF ERROR CODES ARE PRESENT THEY WILL BE DISPLAYED. IF MULTIPLE CODES EXIST YOU CAN TOGGLE BETWEEN ERROR CODES USING THE 'SCROLL' BUTTON. TO CLEAR ALL CODES PRESS THE 'ENTER' AND 'SCROLL' BUTTONS FOR THREE SECONDS WHILE IN THE ERROR CODE MODE.

920-075-13 (1-11) specifications

Friedrich 920-075-13 (1-11) is a sophisticated HVAC unit designed for effective heating and cooling solutions in commercial and residential settings. This model exemplifies modern engineering with a focus on energy efficiency and user convenience. It features a versatile configuration that makes it suitable for a variety of spaces, ensuring optimal climate control.

One of the main features of the Friedrich 920-075-13 (1-11) is its advanced cooling technology. The unit is equipped with high-efficiency compressors that provide rapid cooling performance while consuming minimal energy. This is complemented by a user-friendly digital thermostat that allows for precise temperature settings, enhancing user comfort and satisfaction.

The heating capabilities of this model are equally impressive. Friedrich has integrated a powerful heating element that can quickly warm up any room, making it ideal for year-round use. This is particularly beneficial in regions with extreme temperature fluctuations, ensuring that users remain comfortable regardless of the season.

In terms of build quality, the Friedrich 920-075-13 (1-11) boasts a robust construction that ensures long-lasting performance. Its durable materials are designed to withstand frequent use and adverse environmental conditions. Additionally, the unit features a compact design that allows for easy installation and integration into existing spaces without compromising aesthetic appeal.

Technologically, the Friedrich 920-075-13 (1-11) incorporates smart features such as energy-saving modes and programmable timers. These functionalities enable users to optimize energy use, reducing overall electricity costs while maintaining comfort levels. Moreover, the unit operates quietly, minimizing noise disruption in various settings.

Another notable characteristic is the air filtration system which enhances indoor air quality. The built-in filter captures dust, allergens, and pollutants, ensuring that the air circulated within a space is clean and healthy. This feature is particularly important for individuals with allergies or respiratory conditions.

Finally, the Friedrich 920-075-13 (1-11) is backed by a reliable warranty, reflecting the manufacturer's confidence in its quality and performance. This HVAC unit represents an ideal choice for those seeking a combination of efficiency, comfort, and modern technology in their heating and cooling systems. With its powerful features and innovative design, it stands out as a leading option in the market.

Friedrich 920-075-13 (1-11) Service & Warranty, Servicing / Chassis Quick Changeouts

Models: 920-075-13 (1-11)