Friedrich 920-075-13 (1-11) Model, Description, Photo, Accessories, VPAWP1-8, VPAWP1-14, VPAL2

ACCESSORIES
	MODEL	DESCRIPTION		PHOTO
		WALL PLENUM TWO-PART SLEEVE THAT TELESCOPES IN AND OUT
		FROM 5 ½" TO 8" IN DEPTH. THE WALL PLENUM SITS INSIDE THE
	VPAWP1-8	EXTERIOR WALL PENETRATION.
		DIMENSIONS: 30 ⅜" HIGH X 241 8 " WIDE.
		COUTOUT DIMENSIONS: 30 7 8" HIGH X 24 5 8 " WIDE.
	VPAWP1-14	SAME AS VPAWP1-8, BUT TELESCOPES 8" TO 14" AS REQUIRED.
		ARCHITECTURAL LOUVER EXTRUDED ALUMINUM LOUVER THAT
	VPAL2	ATTACHES TO THE OUTDOOR SECTION OF THE WALL PLENUM.
		DIMENSIONS: 311 16" HIGH X 25 9 16" WIDE.
	VPSC2	SAME AS VPAL2 BUT CAN BE ORDERED IN A SPECIAL COLOR TO MATCH
		THE EXTERIOR WALL.
		DIGITAL REMOTE WALLL THERMOSTAT SINGLE	STAGE
	RT4	THERMOSTAT, USED ON VERT-I-PAK UNITS. HARD WIRED WITH SINGLE
		SPEED FAN. DIRECT REPLACEMENT FOR RT2.
		DIGITAL REMOTE WALL THERMOSTAT SINGLE STAGE
	RT5	THERMOSTAT. FEATURES HIGH/LOW FAN SPEED SWITCH. THERMOSTAT IS
		HARD WIRED AND CAN BE BATTERY POWERED OR UNIT POWERED.
		FEATURES BACKLIT DISPLAY AND MULTIPLE CONFIGURED MODES.
		DIGITAL REMOTE WALL THERMOSTAT SINGLE	STAGE
		COOL, SINGLE STAGE HEAT THERMOSTAT. FEATURES HIGH/LOW FAN
	RT6	SPEED SWITCH. THERMOSTAT IS HARD WIRED AND CAN BE BATTERY
		POWERED OR UNIT POWERED. FEATURES BACKLIGHT DISPLAY AND
		MULTIPLE CONFIGURATION.
		ACCESS PANEL / RETURN AIR GRILLE – SERVES AS AN ACCESS
		PANEL TO CHASSIS AND INTERIOR RETURN AIR GRILLE. A FIELD-SUPPLIED (25"
		X 20") FILTER IS MOUNTED INSIDE THE HINGED ACCESS DOOR.
		KIT CONTAINS HINGE BRACKET FOR MOUNTING THE DOOR WITH THE RETURN AIR
		OPENINGS HIGH OR LOW ON THE DOOR FOR OPTIMAL SOUND ATTENUATION. FOR
	VPRG4	9,000 / 12,000 / 18,000 BTU MODELS, IT IS RECOMMENDED TO INSTALL
		THE DOOR WITH THE HINGE ON THE RIGHT SIDE AND THE RETURN AIR
		OPENINGS HIGH ON THE DOOR. FOR 24,000 BTU MODELS, IT IS RECOM-
		MENDED TO INSTALL THE HINGE ON THE LEFT SIDE WITH THE RETURN AIR
		OPENINGS LOW ON THE DOOR.
		DIMENSIONS: 58" HIGH X 29" WIDE.
		COUTOUT DIMENSIONS: 55 3/4" HIGH X 27" WIDE.

17