SET UP ENTER SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
CANCEL
AUTO SET
PLEASE WAIT...
INITIAL SET UP > AUTO SET
SET UP ENTER SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
11 12 13
GUIDE PROG SET
MANUAL CH SET
AUTO CH SET
TUNER SET CLOCK SET
DVD VIDEO SET UP HDD/DVD/DV SET FUNCTION SET UP INITIAL SET UP
3 Press selection keys to select ATUNER SETB, then press G.
4 Press selection keys to select
AAUTO CH SETB, then press
ENTER.
● When you have connected the unit to a TV offering T-V Link
via a fully-wired21-pin SCART cable (A pg. 18), the unit
automatically performs the Preset Download and the T-V
LINK screen will appear. (A pg. 20)
● The Auto Set screen appears, and remains on screen while the unit searches for
receivable stations.
FGDE
SET UP
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download. (A pg. 19, 20)
^ you have moved to a different area or if a new station starts broadcasting in your area.
Auto Channel Set
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press G.
Selection Keys
74 EN SUBSIDIARY SETTINGS

VIDEO Plus+ System Setup

IMPORTANT:

Normally, Auto Set Up (A pg. 19), Preset Download (A pg. 20) or Auto Channel Set (A pg. 74) sets the Guide Programme numbers automatically. You need to set the Guide Programme numbers manually only in the following cases.

●When timer programming with the VIDEO Plus+ system, the channel position, where the station you wish to record is received on your unit, is not selected,

OR

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

^Set the Guide Programme number for that station manually.

●When you wish to timer record a satellite programme with the VIDEO Plus+ system,

^Set the Guide Programme numbers for all satellite broadcasts received on your satellite receiver.

Tuner Set

Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR +/– buttons without going through any vacant channels.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

TVDVD

● Turn on the unit.

 

● Turn on the TV and select the AV mode.

ENTER

● Slide the TV/CABLE/SAT/DVD switch to DVD.

Guide Programme Number Set

1 Press SET UP to access the Main Menu screen.

2 Press selection keys to select AINITIAL SET UPB, then press G.

3Press selection keys to select ATUNER SETB, then press G.

4Press selection keys to select AGUIDE PROG SETB, then press ENTER.

5Press selection keys to select AGUIDE PROGB, then press

ENTER.

6Press selection keys to select the Guide Programme number for the desired station as shown in the TV listings. Then press ENTER.

DVD VIDEO SET UP HDD/DVD/DV SET

FUNCTION SET UP INITIAL SET UP

TUNER SET

 

CLOCK SET

 

 

AUTO CH SET

MANUAL CH SET

 

 

GUIDE PROG SET

 

 

11 12 13

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

EXIT

SELECT

PRESS [SET UP] TO EXIT

 

 

111213 INITIAL SET UP > GUIDE PROG SET

 

GUIDE PROG

 

1

TV PROG

 

 

YLE2 1

 

 

 

RETURN

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

EXIT

SELECT

PRESS [SET UP] TO EXIT

 

 

7Press selection keys to select

ATV PROGB, then press ENTER. Press selection keys to select the number of the unit’s channel position on which the Guide Programme number’s broadcast is received by the unit or the satellite receiver. Then press ENTER.

●Repeat steps 5 – 7 as necessary.

8Press SET UP to complete the setting.

Guide Programme Number

AGuide Programme (GUIDE PROG) numberB refers to the assigned TV station numbers, according to broadcast area, for the VIDEO Plus+ timer recording. The Guide Programme Numbers can be found in most TV listings.