How to Use SET-UP MENU (cont.)

￿ HOUR METER X100h

COLOR TEMP./BAL.

Displays the total usage time of the monitor in

 

 

 

 

 

 

 

 

 

 

 

 

Sets or adjusts the color

 

 

 

 

 

 

 

 

 

 

 

 

hundred-hour units.

 

 

 

 

 

 

 

 

 

 

 

 

temperature or white

 

 

 

 

 

 

 

 

 

 

 

 

• 000 O 655

 

 

 

 

 

 

 

 

 

 

 

 

balance.

 

 

 

 

 

 

 

 

 

 

 

NOTES:

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When the timer passes 655, it returns to 000.

 

 

 

 

 

 

 

 

 

 

 

 

Use the five items indicated with

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The timer does not count the usage time under one hour.

 

 

 

 

 

 

 

 

 

 

 

 

mark to make fine adjustments

 

 

 

 

 

 

 

 

 

 

 

 

 

between the monitors.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PICTURE SUB ADJ.

The standard value (“00”) of the picture adjustment is initially set at the factory. You can adjust the standard value as your initial setting.

• Can also be used to switch the NTSC set-up level, and change the component or SD SDI signal’s input level settings.

￿CONTRAST

•–20 O 00 O +20

￿BRIGHT

•–20 O 00 O +20

￿CHROMA

•–20 O 00 O +20

￿PHASE

•–20 O 00 O +20

￿NTSC SETUP

Sets the set-up level of the input NTSC signal.

00:Compliant with 0% set-up signal. 7.5: Compliant with 7.5% set-up signal.

￿COMPO. LEVEL

Sets the set-up level of the input component or SD SDI signal.

This item appears on the menu only when using the Multi-Format SDI Unit (option) or the Component Unit (option).

SMPTE: Compliant with M2VTR signals.

B00: Compliant with Betacam 0% set-up signal.

B75: Compliant with Betacam 7.5% set-up signal.

￿COLOR TEMP.

Selects the color temperature.

HIGH: Sets the color temperature to 9300.

LOW: Sets the color temperature to 6500.

￿BLUE DRIVE

Adjusts the blue drive level.

•MIN O 000 O MAX (in 127 grades)

￿RED DRIVE

Adjusts the red drive level.

•MIN O 000 O MAX (in 127 grades)

￿GREEN CUTOFF

Adjusts the green cut-off point.

•MIN O MAX (in 155 grades)

￿BLUE CUTOFF

Adjusts the blue cut-off point.

•MIN O MAX (in 155 grades)

￿RED CUTOFF

Adjusts the red cut-off point.

•MIN O MAX (in 155 grades)

16