Manuals / Brands / Computer Equipment / Computer Monitor / JVC / Computer Equipment / Computer Monitor

JVC DT-V100CG 2. Attach the Power Cord Holder cover to the AC power cord

1 24

Download 24 pages, 1.14 Mb

Preparation (cont.)

Attaching the Power Cord Holder

•The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet.

•The Power Cord Holder consists of two parts; a case and a cover.

1.Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided).

Caution:

Use only the provided screws.

2. Attach the Power Cord Holder cover to the AC power cord.

Close the cover until it clicks.

3.Connect the AC power cord to the AC inlet, and join the Power Cord Holder cover with the case.

Caution:

•A different plug shape will result in the cover being attached to a different position.

•Make sure the plug doesn't pull out after the cover is attached.

Hold until it clicks.

NOTE:

To disconnect the power cord, click the tab to open the cover.

Contents

Page CAUTION: Power cord Warning: Note for the United Kingdom power cord only How to replace the fuse SAFETY PRECAUTIONS Controls and Features Preparation (MAIN MENU, SET-UPMENU) How to Use MAIN MENU 1Tally lamp CHROMA )/PHASE ) button CHROMA“PHASE 5SCAN SIZE button 6SCREENS CHECK button 7MARKER button INPUT SELECT buttons/lamps C/D: qAC inlet wMain power switch eInput unit area rComposite signal input/output terminals (VIDEO A, VIDEO B) To Select VIDEO A terminal: Press the INPUT SELECT A button 1.Prepare the provided wide mask and 4 screws (for attaching) 2.Attach the wide mask to the monitor 2. Attach the Power Cord Holder cover to the AC power cord MAIN MENU SET-UPMENU To display MAIN MENU To display SET-UPMENU To delete the sub-menudisplay: To change the positions and the contents of the sub-menudisplay MAIN MENU Move the MENU control Setting Items Move the MENU control to / to adjust an item APERTURE CONTROL MARKER • 00 O HIGH: LOW: • 4:3/13:9/14:9 80%: 88%: 90%: COLOR MATRIX SET-UPMENU FUNCTION SETTING AUTO: NTSC: PAL: INT.: COLOR TEMP./BAL • 000 O PICTURE SUB ADJ •–20 O 00 O +20 00: SIZE/POSI. ADJ •–20 O 00 O +20 (*) • –20 O 00 O +20 • –10 O 00 O +10 • – 20 O STATUS DISPLAY • AUTO/MANUAL/OFF • 1080/1035 Setting the AUDIO LEVEL METER display AUDIO LEVEL METER display example NO Functions to be controlled Caution: Opening Short-circuiting 1.Cable 2.Communications Specifications 3.Commands Problems Points to be checked Measures (Remedy) Reference pages The following are not malfunctions: 7Dimensions V100CG-DT