JVC 0110SKH-MW-MT, DT-V20L3G, DT-V24G1 Daily Operations / Connections

10
Daily Operations / Connections (cont.)
7 Available signals
Video signals
No. Signal name Signal format shown in the
status display (☞ page 7)
Input terminal
VIDEO
(INPUT1, INPUT2)
COMPO./RGB(Analog
component/Analog RGB)*1
E. AUDIO SDI (IN 1, IN 2)*2DVI-D (HDCP)
(Digital component/Digital RGB)
SD/HD (1.5G) 3G SDI DUAL LINK
1 NTSC NTSC √———— —
2 PAL PAL √———— —
3 B/W50 B/W50 √———— —
4 B/W60 B/W60 √———— —
5 480/60i 480/60i — √√ —— √
6 480/59.94i 480/59.94i — √√ —— √
7 576/50i 576/50i — √√ —— √
8 480/60p 480/60p — √——— √
9 480/59.94p 480/59.94p — √—— — √
10 576/50p 576/50p — √——— √
11 640*480/60p 640*480/60p — — — — — √
12 640*480/59.94p 640*480/59.94p — — — — — √
13 720/60p 720/60p — √√√ —√
14 720/59.94p 720/59.94p — √√√ —√
15 720/50p 720/50p — √√√ —√
16 720/30p 720/30p — √√√ ——
17 720/29.97p 720/29.97p — √√√ ——
18 720/25p 720/25p — √√√ ——
19 720/24p 720/24p — √√√ ——
20 720/23.98p 720/23.98p — √√√ ——
21 1080/60i 1080/60i — √√√√ √
22 1080/59.94i 1080/59.94i — √√√√ √
23 1035/60i 1035/60i — √*3√—— √*3
24 1035/59.94i 1035/59.94i — √*4√—— √*4
25 1080/50i 1080/50i — √√√√ √
26 1080/60p 1080/60p — — — √√ √
27 1080/59.94p 1080/59.94p — — — √√ √
28 1080/50p 1080/50p — — — √√ √
29 1080/30p 1080/30p — √√√√ √
30 1080/29.97p 1080/29.97p — √√√√ √
31 1080/25p 1080/25p — √√√√ √
32 1080/24p 1080/24p — √√√√ √
33 1080/23.98p 1080/23.98p — √√√√ √
34 1080/30psF 1080/30psf — √*3√*3√√ —
35 1080/29.97psF 1080/29.97psf — √*4√*4√√ —
36 1080/24psF 1080/24psf — √√√√ —
37 1080/23.98psF 1080/23.98psf — √√√√ —
38 1080/25psF 1080/25psf — — — √√ —
*1 Analog component/analog RGB
signals are compatible with G on
sync signal, Y on sync signals, and
composite sync signals (CS). The
separate sync signal (HS/VS) is
not compatible.
*2 Compatible with EMBEDDED
AUDIO signals.
*3 The signal is recognized as
1080/60i, and the status is
displayed as “1080/60i.”
*4 The signal is recognized as
1080/59.94i, and the status is
displayed as “1080/59.94i.”
√: Acceptable
—: Not acceptable
The following signals are available for this monitor.
On the signal format
The following messages appear
depending on the type of input
signals and their conditions.
When a DVI-D signal protected
with HDCP is input
\
“*” (at the end of the indication)
When no video signal comes in
\ “NO SYNC”
When a noncompliant video
signal comes in
\ “Out of range”
When “COLOR SYSTEM” (☞
“FUNCTION SETTING” on
page 16) is set to “AUTO” and
the noncompliant composite
video signals come in
\ “OTHERS”
DT-V24G1_20L3G_EN.indd 10DT-V24G1_20L3G_EN.indd 10 10.1.15 3:22:18 PM10.1.15 3:22:18 PM