JVC GET0635-003A, GET0634-001A, GET0634-005A, GET0633-001A, KD-R514 Listening to the USB device

Changing the display information Using the remote controller

Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time

=Current track number with the clock

5 U/D ∞ : Selects folder of the
	MP3/WMA
2 R/F 3	: Selects track
2 R/F 3	: Fast-forwards or
[Hold]	reverses the track

time = (back to the beginning)

*If the current disc is an audio CD, “NO NAME” appears.

If an MP3/WMA file does not have Tag

information or <TAG DISPLAY> is set to

<TAG OFF> ( 13), folder name and file name appear.

Listening to the USB device

This unit can play MP3/WMA tracks stored in a USB device.

~ Ÿ USB input jack

] Turn on the power.

USB memory

All tracks will be played repeatedly until you change the source or detach the USB device.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

If you have turned off the power (without

detaching the USB device)...

Pressing /SOURCE turns on the power and playback starts from where it has been stopped previously.

•If a different USB device is currently attached, playback starts from the beginning.

Stop playing and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press /SOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc. ( 9)

10

ENGLISH