JVC KD-R514, GET0634-001A, GET0634-005A, GET0633-001A, KD-R516, KD-R515 Wma to non-MP3 or WMA tracks

	Symptom	Remedy/Cause
	Noise is generated.	The track played back is not an MP3/WMA track. Skip to
		another file. (Do not add the extension code <.mp3> or
		<.wma> to non-MP3 or WMA tracks.)
	“READING” keeps flashing on	• Readout time varies depending on the USB device.
	the display.	• Do not use too many hierarchy or folders.
		• Turn off the power then on again.
		• Reattach the USB device again.
	“NO FILE” appears on the	Selected folder is an empty folder *. Select another
	display.	folder that contains MP3/WMA tracks.
		* Folder that is physically empty or folder that contains
		data but does not contain valid MP3/WMA track.
playback
	“NOT SUPPORT” appears on the	Skip to the next track encoded in an appropriate format
	display and track skips.	or to the next non-copy-protected WMA track.
device	Tracks/folders are not played	The playback order is determined by the write-in time
	back in the order you have	stamp. The first track/folder written into the USB device
USB	intended.	will be the first track/folder for playback.
	• “CANNOT PLAY” flashes on	• Attach a USB device that contains tracks encoded in
	the display.	an appropriate format.
	• “NO USB” appears on the	• Reattach the USB device again.
	display.
	• The unit cannot detect the
	USB device.
	While playing a track, sound is	The MP3/WMA tracks have not been properly copied
	sometimes interrupted.	into the USB device.
		Copy MP3/WMA tracks again into the USB device, and
		try again.
	Correct characters are not	This unit can only display letters (upper case),
	displayed (e.g. album name).	numbers, and a limited number of symbols. (	8)

JVC bears no responsibility for any loss of data in the USB mass storage class device while using this System.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

ENGLISH

23