Changing the display information

Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time = Current track number with the clock time = (back

to the beginning)

*If the current disc is an audio CD, “NO NAME” appears.

If an MP3/WMA file does not have Tag information or <TAG DISPLAY> is set to <TAG OFF> ( 14), folder name and file name appear.

Listening to the USB device

This unit can play MP3/WMA files stored in a USB device.

~

Ÿ USB input jack

] Turn on the power.

USB memory

All tracks will be played repeatedly until you change the source or detach the USB device.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

If you have turned off the power (without

detaching the USB device)...

Pressing /SOURCE turns on the power and playback starts from where it has been stopped previously.

If a different USB device is currently attached, playback starts from the beginning.

Stop playing and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press /SOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc.

( 9)

10

ENGLISH

Page 72
Image 72
JVC GET0634-001A, GET0634-005A, GET0633-001A To the beginning, This unit can play MP3/WMA files stored in a USB device