Changing the aspect ratio

Each time you press the button, the aspect ratio changes as follows:

REGULAR

Displays at conventional 4:3 aspect ratio.

FULL

Enlarges the picture of 4:3 aspect ratio horizontally.

• For the picture of 16:9 aspect ratio, the aspect ratio is not changed.

ZOOM

Enlarges the picture of 4:3 aspect ratio vertically and horizontally at the same ratio.

PANORAMIC

Enlarges the picture of 4:3 aspect ratio horizontally to the extent that the picture does not look abnormal.

<PC input ONLY>REAL DOT

Displays center portion of the original picture input from the computer (SXGA or UXGA signals) without changing the number of pixels. (Some of the

picture will be cut off.)

Ex. For SXGA signals

 

NOTE

•For some signals, the aspect ratio cannot be changed or some modes cannot be selected.

•When using the buttons on the main unit for changing the aspect ratio, use the main menu (see “SIZE SETTING” on page 19).

Ex. For UXGA signals

Displaying the current status

The information of the current input is displayed on the screen.

Current input

 

*1

When Input C, D, E, or F is selected with an optional

Input type*1

I N P U T A

input card inserted, the type of the card appears. When

V I D E O

no card is inserted, “NO CARD” appears.

 

N T S C

 

When no signal is being input, “NO SYNC” appears.

Input signal format*2

*2

 

 

When a signal this monitor does not support is being

 

 

 

input, “Out of range” appears.

NOTE

•When “STATUS DISPLAY” on the main menu is set to “ON” (see page 23), the status is also displayed in the following cases:

–When you turn on the monitor,

–When you change inputs, or

–When you change signal types.

15