Parts Identification

Front panel

Remote sensor:

Point the front end of the remote control toward here.

Eco sensor:

Detects brightness of the room (see page 23).

Self-diagnostic lamps:

These lamps light/flash if something abnormal occurs with the monitor (see page 36).

Power lamp:

When the monitor is turned off: Unlit.

When the monitor is turned on: Lights in green.

When the monitor is in sleep mode: Flashes in orange.

When the monitor is in standby mode: Lights in orange.

Rear panel

Input card slots (SLOT-1, SLOT-2):

Optional input cards can be installed in these slots.

• For details about input cards, refer to the instructions of the input card.

REMOTE terminals

Connect external control equipment (see pages 12, 31 to 33). RS-232C terminal: Connect to the RS-232C terminal of a

personal computer. For the control method using this terminal, consult an authorized JVC dealer.

RS-485 terminals:

IN terminal: Connect external control equipment.

OUT terminal: Connect another component to send out the control signal coming into the IN terminal (cascade connection).

AUDIO OUT terminals

Connect external speakers or audio equipment.

EXT. SPEAKER terminal: Connect external speakers (commercially available) (see page 10).

• To use this terminal, set “SPEAKER SELECT” on the main menu to “EXT. (external)” (see page 21).

MONITOR OUT terminals: Connect to the audio input terminals of audio equipment such as an amplifier (see page 12).

6