JVC GM-H40L1G Item, Item, To do, PHASE, reset, To do, reset, BRIGHT, CHROMA, H SIZE, V SIZE, ASPECT, CTI/LTI, CONTRAST, sub menu, sub menu, SHARPNESS, DOT CLOCK

PICTURE SETTING

Item	To do	Setting value
PICTURE MODE	Selects a picture mode you want (see “Selecting the picture mode”	DYNAMIC, NORMAL, USER
	on page 16).
CONTRAST	Adjusts contrast of the picture.	–20 += 00 += +20
BRIGHT
	Adjusts the brightness of the picture.	–20 += 00 += +20
CHROMA
	Adjusts the color density of the picture (except for RGB and BW	–20 += 00 += +20
	(50 Hz/60 Hz) signals).
PHASE	Adjusts the color phase.	–20 += 00 += +20
SHARPNESS
	Adjusts the outlines of the picture.	–20 += 00 += +20
BACK LIGHT
	Adjusts the brightness of the display.	–20 += 00 += +20
COLOR TEMP.	Selects the color temperature.	HIGH, MID, LOW, USER
sub menu
	Displays the adjustment bar which enables you to adjust the items in “PICTURE SETTING”
	(except for “CTI/LTI”) while viewing the actual picture.
CTI/LTI
	Adjusts the clearness of the picture.	OFF, 1, 2
reset	Restores the default setting for all the items in “PICTURE SETTING.”

NOTE

•You can adjust the items in “PICTURE SETTING” for each picture mode. Select a picture mode you want to adjust first. (The setting values are stored.)

•“PHASE” does not appear on the menu for the following input signals:

– RGB, PAL, SECAM, BW (50 Hz/60 Hz)

•You can make the detailed settings of the color temperature using the set-up menu (see “COLOR TEMP.” on page 25).

SIZE SETTING

Item	To do	Setting value
H SIZE	Adjusts the horizontal screen size.
H POSITION
	Adjusts the horizontal screen position.	Varies depending on other
V SIZE	Adjusts the vertical screen size.	settings.
V POSITION
	Adjusts the vertical screen position.
DOT CLOCK
	Adjusts to eliminate stripes or flickering when analog signals	–10 += 00 += +10
	are being input from a computer. Use with “CLOCK PHASE.”
	Normally, no adjustment is needed.
CLOCK PHASE	Adjusts to eliminate stripes or flickering when analog signals	–32 += 00 += +32
	are being input from a computer. Use with “DOT CLOCK.”
	Normally, no adjustment is needed.
ASPECT
	Selects the aspect ratio (see “Changing the aspect ratio” on	REGULAR, FULL, ZOOM,
	page 15).	PANORAMIC, REAL DOT
sub menu
	Displays the adjustment bar which enables you to adjust H SIZE/POSITION, V SIZE/POSITION,
	DOT CLOCK, and CLOCK PHASE while viewing the actual picture.
reset	Restores the default setting for all the items in “SIZE SETTING.”

NOTE

•During the size and position adjustments, the picture may be distorted but this is not a malfunction.

•Size and position adjustments are related so that if one is set to a higher setting value, the other’s setting value will be reduced.

19