COLOR TEMP.
Item | To do | Setting value |
R DRIVE, G DRIVE, | Adjusts the drive level of each color (red, green, and blue). | MIN += 000 += MAX (in |
B DRIVE |
| 512 grades) |
R CUT OFF, G CUT OFF, | Adjusts the | MIN += 000 += MAX (in |
B CUT OFF |
| 512 grades) |
sub menu |
|
|
Displays the adjustment bar which enables you to adjust the drive level and | ||
| viewing the actual picture. |
|
reset |
|
|
Restores the default setting for all the items in “COLOR TEMP.” |
| |
NOTE
•Adjust the color temperature after selecting color temperature (HIGH, MID., LOW, or USER) on the main menu (see “PICTURE SETTING” on page 19).
NO SYNC FUNCTION
Item | To do | Setting value |
NO SYNC DISPLAY | Selects the screen color (or sleep mode) when no signal is being | OFF, SLEEP (sleep mode), |
| input. | RED, GREEN, BLUE, GRAY |
DELAY TIME | Sets the time to change the screen color (or sleep mode) set in | 5s, 1min., 30min. |
| “NO SYNC DISPLAY” above after signals stops being input. |
|
reset |
|
|
Restores the default setting for all the items in “NO SYNC FUNCTION.” | ||
REMOTE SYSTEM
Item | To do | Setting value |
REMOTE IN SEL. | Selects the input terminal used for external control. | |
CNT. RJ45 OUT |
|
|
Selects the external control method for | RS485, IR OUT | |
CNT. RJ45 IN |
|
|
Selects the external control method for | RS485, MAKE, TRIG., SET | |
PORT F1 – PORT F5 | Assigns the control function to the | INP. A – INP. F, POWER, |
| 5) when selecting “SET” in “CNT. RJ45 IN” above. | ASPECT, MUTING, PIP, PBP, |
|
| – – – (no function) |
reset |
|
|
Restores the default setting for all the items in “REMOTE SYSTEM.” |
|
NOTE
• For details about external control, see pages 31 to 33.
POWER ON LOCK
Item | To do | Setting value |
POWER ON LOCK | Activates/deactivates the | ON, OFF |
| activated, the monitor cannot be turned on without entering the |
|
| password set in “PASS ID SETTING” below. |
|
PASS ID SETTING |
|
|
Sets the password for the | 4 characters |
NOTE
• For details about the
25