JVC GM-H40L1G TIMER, VCR ADJ, CONTROL LOCK, POWER ON DELAY, SYNC TERM

TIMER

Item		To do	Setting value
PRESENT TIME		Sets the clock.
	HOURS	Sets the hour.	00 += 23
	MINUTES	Sets the minute.	00 += 59
POWER-ON SET
		Activates/deactivates the power-on timer.	ON, OFF
POWER-ON TIME		Sets the time to turn on the monitor.
	HOURS	Sets the hour.	00 += 23
	MINUTES	Sets the minute.	00 += 59
POWER-OFF SET		Activates/deactivates the power-off timer.	ON, OFF
POWER-OFF TIME
		Sets the time to turn off the monitor.
	HOURS	Sets the hour.	00 += 23
	MINUTES	Sets the minute.	00 += 59
reset
		Restores the default setting for all the items in “TIMER.”

VCR ADJ.

Adjusts when the picture played back on a VCR is distorted. (Depending on the condition of the connected VCR or the playback tape, the picture quality may not be improved.)

Setting value: –05+= 00 += +05

CONTROL LOCK

Activates/deactivates the Control Lock. When this function is activated, you cannot operate the monitor with the buttons on the main unit.

Setting value: ON, OFF

NOTE

• You can use the remote control and external control while the control lock is set. To release the lock, use the remote control.

POWER ON DELAY

Sets the time when the power supply to the monitor’s circuits (excluding the micro computers) starts after the power button is pressed.

Setting value: OFF, FAST, SLOW

NOTE

•If you are going to turn several monitors on at the same time, it is recommended to apply “SLOW” to some of the monitors to control rush current.

SYNC TERM.

Sets the resistance of Horizontal sync/Composite sync signal and Vertical sync signal when the component/RGB input card (option) is inserted. Normally, select “HIGH” (1 kΩ). If you see pictures flickering or blurring on the screen because of a long connecting cord, set this to “LOW” (75 Ω).

Setting value: HIGH, LOW

NOTE

•When a video input card (option) is inserted, “SYNC SELECT” appears. Set the sync signal to use—INT. (sync signal included in the video signal) or EXT. (external sync signal).

27