JVC GM-H40L1G Item, Item, To do, AUDIO, reset, To do, MUTING, INPUT B, INPUT A, display, AUDIO L ch, AUDIO R ch, QUICK CHANGE, AUDIO SETTING, Setting value, Setting value

AUDIO SETTING

Item	To do	Setting value
SPEAKER SELECT	Selects the speakers you want to use.	INT. (Internal speakers),
		EXT. (External speakers)
MUTING	Turns the volume on or off.	ON, OFF
AUDIO
	Changes the audio mode.	STEREO, MONO
AUDIO L ch.
	Selects the left audio channel when the EMBEDDED AUDIO signal	1ch += 8ch
	is being input.
AUDIO R ch.	Selects the right audio channel when the EMBEDDED AUDIO	1ch += 8ch
	signal is being input.

LEVEL METER SETTING Adjusts the audio level meter display for the EMBEDDED AUDIO signal when the HD/SD SDI or

		SDI input card (option) is inserted (see “Example of the level meter display” below).
	LEVEL METER ch	Selects the audio channels used in the audio level meter	OFF, 1:2, 12:34, 31:24,
		display. (The numbers indicate the audio channel. The	123:456, 1–8
		input level for the channels indicated on the left side of “:” is
		displayed on the left side of the screen, and the input level for
		the channels indicated on the right side of “:” is displayed on
		the right side of the screen.)
	BAR TYPE	Selects the color of the audio level meter display.	3COLORS (3 colors to
			indicate variations in input
			levels), W.100 (white), W.50
			(half transparent)
	BAR BRIGHTNESS	Selects the brightness of the audio level meter display.	HIGH, LOW
	REFERENCE LEVEL	Sets the standard input level.	–20dB, –18dB
	OVER LEVEL	Sets the input level’s lower limit indicated in red for the	–10dB, –8dB, –6dB, –4dB,
		“3COLORS” display.	–2dB
	reset	Restores the default setting for “LEVEL METER SETTING.”
reset
		Restores the default setting for all the items in “AUDIO SETTING.”

INPUT CONFIGURATION

Item	To do	Setting value
QUICK CHANGE	Sets if you want to change Inputs A and B quickly.	OFF, INPUT A&B
INPUT B	Selects the terminal and signal type you want to use for Input B.	ANALOG RGB, DVI,
		COMPONENT
INPUT A
	Displays the terminal being used for Input A (“VIDEO (BNC)” or	—
	“VIDEO (Y/C)”).
INPUT C/D/E/F
	Shows the status of the input card slots. When no input card is	—
	inserted, “NO CARD” appears.

Example of the level meter display—Level indication and audio channels

Ex.: When “LEVEL METER ch” is set to “1–8” and ”BAR TYPE” is set to “3COLORS.”

NOTE

•When “BAR TYPE” is set to “W.100” or “W.50,” the standard input level set in the “REFERENCE LEVEL” is displayed with the line indication. Input level set in “OVER LEVEL” is not displayed.

•The audio channel bar with no signal input is displayed in white for the “3COLORS” setting, and in gray for other settings.

Red OVER LEVEL

Yellow

Green

REFERENCE

LEVEL

Audio channels

21