JVC GNT0013-014A AUDIO page, Subtitle, On Screen Language, Digital Audio Output, Initial settings

Initial settings

Initial settings

SUBTITLE

You can select the default subtitle language to be displayed if it is contained on the disc.

Each time you press	LANGUAGE	AUDIO	DISPLAY SYSTEM
CURSOR 3, the language	MENU LANGUAGE			ENGLISH
	AUDIO LANGUAGE			ENGLISH
setting changes in the	ON SCREEN LANGUAGE			ENGLISH
	SUBTITLE			ENGLISH
following order:				EXIT
	PRESS	KEY

ENGLISH → SPANISH → FRENCH → CHINESE → GERMAN → ITALIAN → JAPANESE → language code from AA to ZU

(See “Appendix A: Table of languages and their abbreviations” at the end of this manual.)

Pressing CURSOR 2 changes the language setting in the reverse order of the above.

*If the selected language is not recorded, the disc’s default subtitle language will be displayed.

ON SCREEN LANGUAGE

You can select the on-screen display language to be displayed.

Each time you press	LANGUAGE	AUDIO	DISPLAY SYSTEM
CURSOR 3, the language	MENU LANGUAGE			ENGLISH
	AUDIO LANGUAGE			ENGLISH
setting changes as follows:	ON SCREEN LANGUAGE			ENGLISH
	SUBTITLE			ENGLISH
				EXIT
	PRESS	KEY

ENGLISH

(Chinese)

ESPAÑOL (Spanish)

English	ON SCREEN LANGUAGE	ENGLISH
Chinese
Spanish	IDIOMA EN PANTALLA	ESPAÑOL

Pressing CURSOR 2 changes the language setting in the reverse order of the above.

AUDIO page
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device	LANGUAGE	AUDIO	DISPLAY SYSTEM
equipped with a digital input,	DIGITAL AUDIO OUTPUT		STREAM / PCM
	DOWN MIX		Lo / Ro
this item must be set	COMPRESSION		ON
correctly.			EXIT
	PRESS	KEY

•PCM ONLY

When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.

•STREAM/PCM

When you connect to the digital input of an amplifier to a built-in DTS, Dolby Digital, or MPEG multichannel decoder.

•DOLBY DIGITAL/PCM

When you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder.

The following chart shows the relationship between types of playback discs and output signals.

	Output
Playback discs	STREAM/	DOLBY
		DIGITAL/	PCM ONLY
	PCM
		PCM
DVD with 48 kHz,	48 kHz,16 bit	+	+
16 bit linear PCM	linear PCM
DVD with 48 kHz,	48 kHz,
20/24 bit linear	20/24 bit	+	+
PCM	linear PCM
DVD with 96 kHz,	No output	+	+
linear PCM
DVD with DTS	DTS bitstream	No ouput	+
DVD with Dolby	Dolby Digital	+	48 kHz, 16 bit
Digital	bitstream		linear PCM
DVD with MPEG	MPEG	48 kHz, 16 bit	+
multichannel	bitstream	linear PCM
Video CD/SVCD	44.1 kHz,
	16 bit	+	+
	linear PCM
Audio CD	48 kHz,16 bit	+	+
	linear PCM
Audio CD with DTS	DTS bitstream	+	+
MP3 CD	No output	+	+

NOTES

•The unit does not provide the DTS decoding function.

•When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit's analog output jacks, which output incorrect signals that may damage your speakers.

•If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

46