JVC GNT0013-014A Getting started, Connections, Before making any connections, To connect to a TV

Getting started

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)

The unit

DIGITAL OUT	VIDEO OUT		PR		AV COMPU LINK	For XV-S402SL
PCM / STREAM	Y	PB				If the TV has an AV COMPU LINK terminal,
	COMPONENT
COAXIAL				VIDEO OUT SELECT		you can use the AV COMPU LINK function.
OPTICAL				AND	AND
				S-VIDEO	COMPONENT
				VIDEO	VIDEO	See “AV COMPU LINK remote control
					NTSC PAL
-VIDEO	VIDEO	RIGHT	LEFT			system” on page 52 for details.

: For XV-S402SL

Yellow White

Red	Yellow
Audio/Video cable	White
	Red
(supplied)
S-video cable
(not supplied)

TV

IN

S-VIDEO

VIDEO

LEFT

AUDIO

RIGHT

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection to get better picture quality.

Enabling the S-VIDEO output or the VIDEO output

For your TV connection, you can use either the S-video output or the component video output.

When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear panel to “S-VIDEO AND VIDEO”. ( For XV-S402SL, the VIDEO jack is enabled regardless of this switch position.) Then, “S-VIDEO” appears on the display window for a few seconds.

(Display Window)

VCDVD GROUP TITLE TRACK CHAP 1 A-B

PROGRAM

RANDOM

Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD removed. Otherwise, the changed setting is not effective.

16