JVC GNT0013-014A To connect to a TV with the component video input jacks, started, Blue, Green

Getting started

Selecting the Color System

The unit is compatible with the PAL and NTSC systems, Set the VIDEO OUT SELECT (NTSC/PAL) switch on the rear panel to match the color system of your TV. Make sure that the color system of a DVD VIDEO/Video CD/SVCD disc labeled on the package matches your TV.

If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems by setting the VIDEO OUT SELECT (NTSC/PAL) switch appropriately. However, note that you must change the switch position while the unit power is off with the DVD removed (on standby). Otherwise, the changed setting is not effective.

NOTE

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

•When you use the S-VIDEO or VIDEO signal connection, no picture will appear if setting is made to COMPONENT. In this case, switch the setting to S-VIDEO. However, in XV-S400 series, when you use the video (composite) signal connection, a picture normally appears regardless of the VIDEO OUT SELECT switch setting.

To connect to a TV with the component video input jacks

You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables.

Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details how to make them active.

started

		Blue
Green		Red	Component video cable
			(not supplied)
The unit
DIGITAL OUT		OUT
PCM / STREAM	COMPONENT			AV COMPU LINK
COAXIAL	Y	PB PR
			VIDEO OUT SELECT
OPTICAL			S-VIDEO	COMPONENT
			AND	AND
			VIDEO	VIDEO
				NTSC PAL
S-VIDEO	VIDEO
	Red	White		: For XV-S402SL

Audio cable (not supplied)

White

Red

Blue

Green Red

TV

IN

S-VIDEO	Y PB PR
VIDEO	IN

LEFT

AUDIO

RIGHT

Getting

•Connect “Y” to “Y,” “PB” to ”PB,” “PR” to “PR” correctly.

Enabling the COMPONENT VIDEO OUT

For your TV connection, you can use either the component video output or the S-video output.

When you use the component video output, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear panel to “COMPONENT AND VIDEO” (for XV-S402SL), and to “COMPONENT” (for XV-S332SL). Then, “COMPONENT” appears on the display window for a few seconds.

(Display Window)

VCDVD GROUP TITLE TRACK CHAP 1 A-B

PROGRAM

RANDOM

Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD

removed. Otherwise, the changed setting is not effective.

NOTE

•When the component video input jacks of the TV is the BNC type, use an adapter to convert a pin jack to a BNC jack (optional).

•When you use the component signal connection, the screen will become blue if setting is made to S-VIDEO. In this case, switch the setting to COMPONENT.

•If you switch the VIDEO OUT SELECT switch while the unit power is off with a DVD inserted, depending on the DVD being used, the unit may automatically start playback and the video out is not switched as you expected. In this case, press the 7 button. The unit stops and switching is correctly made according to your switch selection.

17