JVC GR-AXM307EG RE Cordi NG Basic Recording, Load a Cassette, Enter RECORD-STANDBY Mode, Power

Models: GR-AXM307EG

1 46
Download 46 pages 54.61 Kb
Page 9
Image 9

10EN

RECORDING Basic Recording

LENS COVER switch

POWER

Start/Stop button

Power indicator

Tally lamp

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

Power (pg. 4)

Tape Length Setting (pg. 8)

Recording Mode Setting (pg. 8)

Grip Adjustment (pg. 9)

LOAD A CASSETTE

1 First slide MONITOR OPEN and open the LCD monitor to an angle of over 45 degrees.

Press EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

Shooting while watching the viewfinder

ENTER RECORD-STANDBY MODE

2 Make sure the LCD monitor is closed and locked. Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to

CAMERA.

•The power indicator lights and the camcorder enters the Record-Standby mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Recording Start/Stop button.

•The tally lamp lights while recording is in progress, and “REC ” appears in the viewfinder.

Page 9
Image 9
JVC GR-AXM307EG RE Cordi NG Basic Recording, Load a Cassette, Enter RECORD-STANDBY Mode, Start Shooting, Power