JVC GR-AXM307EG Set to any position other than Auto Lock, For inserting or replacing

☞ pg. 6

44EN

INDEXLCDmonitor/Viewfinder

1* 2* 3 4 5 6* 7

8

9

0

!

@

#

$

18MIN	DISP.	T30	%*
REC SP	SEPIA		^
			&
	LENS COVER	– 05
			*
FADE		MWB
1MIN	PAUSE	INDEX	(
			)
1/2S	TAPE END		q
			w
MERRY CHR ISTMAS			e
25 . 12 . 97		10 : 24

LCD monitor/Viewfinder Indications

1*Cassette Warning/Remaining		☞ pg. 11
Tape Time
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette (	) Warning blinks.
Otherwise, the Remaining Tape Time is displayed.
2*Recording Mode [SP/LP] Indicator		☞ pg. 8
3, 9 PROGRAM AE Indicator		☞ pg. 16

Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 9.

4 Program Manager Function	☞ pg. 20
Indication
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 Lens Cover Warning	☞ pg. 11
6*Tape Length Display	☞ pg. 8
7 Zoom Level Indicator	☞ pg. 14
8 Recording Indicator	☞ pg. 10
0 Fade-Standby Indicator	☞ pg. 20
! Interval Time/Recording	☞ pg. 26
Time Indicator
@ Record-Standby Mode Indicator	☞ pg. 10
# Instant Title Display	☞ pg. 21
$ Date/Time Character Display	☞ pg. 22

%*Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s

remaining power level: “”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.

(Note: The symbol containing 3 darkened

squares — — does not necessarily mean that the battery pack is fully charged.)

^ Focus Indicator	☞ pg. 18
& Exposure Level Indicator	☞ pg. 17
* White Balance Mode Indicator	☞ pg. 23
( Menu Setting Change Indicator	☞ pg. 24
) Index Code Marking	☞ pg. 37

qClock Warning

Displayed for about 5 seconds if the clock (lithium) battery is not in place or is exhausted when power is turned on. Also displayed for about 5 seconds when clock battery becomes exhausted while using the camcorder.

For inserting or replacing

the clock battery ................................

wCondensation Warning

When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.

e Tape End Display ............................... ☞ pg. 11

Appears when the end of the tape is reached during playback, recording or fast-forward.

*: During recording, pressing DISPLAY lets you remove indications marked with * from the screen.