JVC GR-AXM307EG Lens Cover, Switch, Start/Stop Power indicator, Monitor Open, Speaker

12EN RECORDING BasicRecording(cont.)

Shooting while watching the LCD monitor

LENS COVER

Switch

POWER

Start/Stop

Power indicator

MONITOR OPEN

Speaker

25MIN

Before the following steps, perform step 1 (☞ pg. 10).

ENTER RECORD-STANDBY MODE

2 Make sure the LCD monitor is fully open. Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to CAMERA.

•The power indicator lights and the camcorder enters the Record-Standby mode.

•The scene you’re aimed at appears in the LCD monitor, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Tilt the LCD monitor upward/downward for best viewability (☞ pg. 13) and press the Recording Start/Stop button.

•The tally lamp lights while recording is in progress, and “REC ” appears in the LCD monitor.

STOP RECORDING

4 Press the Recording Start/Stop button again to stop recording.

•The camcorder re-enters the Record-Standby mode.

NOTES:

●When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this

happens, we recommend that you use the viewfinder (☞ pg. 10).

●For other notes, refer to pg. 11.

Tape remaining time indicator

*---MIN 120MIN 119MIN (Now calculating)

0MIN 1MIN 2MIN 3MIN (Blinking) (Blinking) (Blinking)

Tally lamp