JVC GR-DF430 Initialising a Memory Card, To Reset The Number Of Prints, FORMAT, and press

36 EN ADDITIONAL FEATURES FOR D.S.C. (GR-DF570/470 only)

To Reset The Number Of Prints

1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.

2 Press or to select “RESET”, and press SET. The DPOF screen appears.

Initialising A Memory Card

You can initialise a memory card any time. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.

3 Press or to select “EXECUTE”, and press SET. The normal playback screen appears.

●To cancel selection, select “RETURN”.

●The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory card to be corrupted.

1 Set the VIDEO/MEMORY Switch to “MEMORY”.

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Press MENU. The Menu Screen appears.

4 Press or to select	FORMAT
“FORMAT”, and press	ERASE AL L
SET. The FORMAT
	EX I ST I NG DATA?
screen appears.

5 Press or to select “EXECUTE”, and press SET. The memory card is initialised.

EXECUTE RETURN

●When initialisation is finished, “NO IMAGES STORED” or “NO E-MAIL CLIP STORED” appears.

●To cancel initialisation, select “RETURN”.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted, initialise it.