JVC GR-DF430 Audio Dubbing, For GR-DF570/470 owners, To hear the dubbed sound during playback

EDITING EN 55

●The system may not work properly depending on the PC or capture board you are using.

For GR-DF570/470 owners:

“USB” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “USB” is displayed on the LCD monitor since this can result in product damage.

* GR-DF570/470 only

Audio Dubbing

The audio track can be customised only when recorded in the 12-BIT and SP modes.

(
pg. 38)

●Use the provided remote control.

Microphone Connector

	Speaker
	START/
	STOP	Stereo Microphone
	PAUSE
REW	PLAY
INSERT	STOP
	A.DUB

1 Play back the tape to locate the point where editing will start, then press PAUSE (9).

2 While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” and “MIC” indicators appear.

3 Press PLAY (U), then begin “narrating”. Speak into the microphone.

●To pause dubbing, press PAUSE (9).

4 To end Audio Dubbing, press PAUSE (9), then STOP (8).

To hear the dubbed sound during playback

Set “NARRATION” to “ON” or “MIX”. (
pg. 37, 41)

NOTES:

● Sound is not heard from the speaker during Audio Dubbing.

● When editing onto a tape that was recorded at 12-BIT, the old and new soundtracks are recorded separately.

● If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.

● If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.

● If you change from 12-BIT to 16-BIT in mid- recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-BIT recording began.

● During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in 16-BIT audio or a blank portion, Audio Dubbing stops.

● Audio dubbing is also possible using an optional microphone connected to the MIC connector.

● While an optional microphone is connected, the built-in microphone is disabled.

● To perform Audio Dubbing with a video unit connected to the camcorder’s AV connector, first set “S/AV INPUT” to “ON” in VIDEO Menu.

(
pg. 37, 42)

The “AUX” indication appears instead of “MIC”. FEATURES ADVANCED