JVC GR-DVL9000 10ENGETTINGSTARTED, Charging The Battery Pack, Notes, Attach, Detach, BN-V814U

10ENGETTINGSTARTED

Charging The Battery Pack

You can charge one battery pack at a time, or two consecutively.

ATTACH	Battery pack BN-V814U	DETACH
To AC outlet	Power cord	Power cord

Charger indicator 1

Power lamp

AC Power

Adapter/Charger

AA-V80U

DC OUT jack

Charger indicator 2

1 SUPPLY POWER TO CHARGER Plug the AC Adapter/Charger’s power cord in to an AC outlet. The power lamp comes on.

ATTACH BATTERY/BATTERIES
2 Attach while making sure the	marks are

facing down and aligned with the correspond- ing marks on the AC Power Adapter/Charger.

•The Charger Indicator (1 or 2) begins blinking to indicate charging has started.

3 CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

•If two batteries are attached to the charger, they will be charged in the order that they were attached.

4 DETACH BATTERY/BATTERIES

Slide the battery or batteries in the direction of the arrow and lift off.

•Remember to unplug the AC Adapter/Charger’s power cord from an AC outlet.

CHARGING TIME

BATTERY	ONE	TWO
BN-V814U	Approx. 110 min.	Approx. 220 min.

NOTES:

●If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

●When using the AC Power Adapter/Charger, be sure to use the supplied power cord only.

●The AC Power Adapter/Charger is for use with the BN-V814U Battery Pack only.

●When charging the Battery Pack for the first time or after a long storage period, the Charger Indicator may not light. In this case, remove the Battery Pack from the AC Power Adapter/Charger, then try charging again.

●Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.