JVC GR-DVL9000 manual Playback Effects, EN55, Select P.Ae/Effect, RM-V711U, provided

EN55

Playback Effects

These effects allow you to be creative with the playback picture. You can use any one of the 5 effects.

Play button	RM-V711U
	(provided)	T W

P. AE / EFFECT

4OFF

1 CLASSIC FILM

2B/W MONOTONE

3 SEPIA

4 STROBE

5 VIDEO ECHO

PLAY

EFFECT

EFFECT ON/OFF

Lock button

			P
			L
			A
			Y
Power Dial	5S	M	AOFF

Remote sensor

P.AE/EFFECT Select Menu (Playback)

1 START PLAYBACK Press the Play button (4).

2 ACCESS P.AE/EFFECT SELECT MENU Point the remote control at the camcorder’s remote sensor and press EFFECT. The P.AE/ EFFECT Select Menu appears.

3 SELECT P.AE/EFFECT

Move the pointer and highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.

NOTES:

●To deactivate the selected effect, press EFFECT ON/OFF on the remote control. Pressing it again re-activates the selected effect.

●Repeat from step 2 when you want to change the selected effect.

●When a Playback Effect is activated, Pro Snapshot modes (☞ pg. 31) are not possible.

The effects that can be used during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The effects work the same in playback as they did in recording. Refer to page 45 for more information.