1 CONFIRM
2 CONNECT CAMCORDER TO TV OR VCR Connect as shown in the illustration (☞ pg. 58).
If Using A VCR . . . go to step 3.
If not . . . go to step 4.
3 CONNECT VCR OUTPUT TO TV INPUT Refer to your VCR’s instruction manual.
4 TURN ON POWER
Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.
5 SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate for video playback.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time, Time Code
.... set to “ON” or “OFF” in the Playback Menu
(☞ pg. 56).
• Playback Sound Mode Display
.... set the Power Dial to “ | M | ”, press the MENU |
|
|
button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 13) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.
EN
59
NOTES:
●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT connector.
●When using the provided DC cord, VIDEO/ AUDIO cable,
●If TV/VCR is equipped with only one audio connector, use a conversion plug (commercially available).
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●To keep the camcorder's display from appearing on the TV screen during playback, press the ON/ OFF button for longer than 1 second.
●While the VIDEO/AUDIO cable is connected to the AV OUT jack, sound cannot be heard from the speaker.
