JVC GR-DVL9000 Menus, EN33, Select Operation Mode, Select Function, Close Recording Menu, Display

EN33

Menus

The Recording Menu allows you to set these functions:

Recording Mode, Wide Mode, Zoom Magnification, Digital Image Stabilizer, Gain Up, Date/Time Menu, System Menu. The following selection procedure applies to Recording Mode, Wide Mode, Zoom Magnifica- tion, Stabilization and Gain Up.

Please refer to pages 34, 35 for details.

Power Dial

LAY	OFF A
P
	M
	5S

MENU button Select Dial

Display

4	REC MODE	SP
	WIDE MODE	OFF
	ZOOM	40X
	DIS	OFF
	GAIN UP	AGC

TO DATE / TIME MENU TO SYSTEM MENU

END

Recording Menu

REC MODE	SP
WIDE MODE	OFF
ZOOM	40X
DIS	OFF
GAIN UP	AGC

TO DATE / TIME MENU TO SYSTEM MENU

Lock button

4END

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ”, “5S” or “ ” while pressing down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.

3 SELECT FUNCTION

Move the pointer and highlight bar to the desired function by rotating the Select Dial, then press it. The pointer stops blinking, indicating that the function has been selected.

4 SET FUNCTION PARAMETERS Cycle the available settings of the selected function by rotating the Select Dial. Stop when the one you need is displayed. Then press it, the pointer and highlight bar automatically move to “END”.

•To set the parameters for a different function, repeat steps 3 and 4.

5 CLOSE RECORDING MENU

Press the Select Dial. Selection is complete and the menu disappears.