EN73
SYMPTOM |
| POSSIBLE CAUSES |
10. The tape is moving, but |
| 10. •Your TV has AV input |
there’s no picture. |
| terminals, but is not set to |
|
| its VIDEO mode. |
•The cassette’s cover is open.
11.In the
recording ends before | System Menu is set to | ||
5 seconds have elapsed. | “ANIM.”. | ||
12. Pro Snapshot mode | 12. •The Squeeze mode is | ||
cannot be used. | selected. | ||
13. Digital Zoom doesn’t | 13. •10X optical zoom is selected. | ||
work. | •The Video Echo effect is | ||
| activated. | ||
| •Picture Wipe or Dissolve | ||
| are being used in a scene | ||
| transition. | ||
| |||
| done with the Power Dial | ||
| set to “5S”, and with “5SD” | ||
| selected in the System Menu. | ||
| •Pro Snapshot was attempted | ||
| during Digital Zoom. | ||
14. P.AE/Effects and Fade/ | 14. •The Power Dial is set to | ||
Wipe Effects don’t work. | “ | A | ”. |
| •The Power Dial is set to | ||
| “5S”. | ||
15. The Black & White Fader | 15. •The Sepia or Monotone | ||
doesn’t work. | effects are activated. | ||
16. The Dissolve function | 16. •P.AE/Effect Sepia, | ||
doesn’t work. | Monotone or Slow is | ||
| activated. | ||
| •The Squeeze mode is | ||
| selected. | ||
| •The previously selected | ||
| P.AE/Effect was changed | ||
| after the last selected scene | ||
| for editing was registered. |
17.Scene transition does not 17. •When using “Picture Wipe/
go as expected.Dissolve” (☞ pg. 40) or “Dissolves during 5 second mode recording” (☞ pg. 28), there is a delay of a fraction of a second between the previous record
CORRECTIVE ACTION
10.•Set the TV to the mode or channel appropriate for
video playback (☞ pg. 58). •Close the cassette's cover
(☞ pg. 14).
11.•Select “5S” or “5SD” in the System Menu (☞ pg. 37).
12.•Disengage the Squeeze mode (☞ pg. 34).
13.•Turn off the Video Echo effect (☞ pg. 45).
•Wait until the Picture Wipe or Dissolve effects are completed (☞ pg. 40).
•Change the setting of either the System Menu or the Power Dial (☞ pg. 36).
•Do not attempt to take a Pro Snapshot when performing Digital Zoom (☞ pg. 28).
14.•Set the Power Dial to “ M ” (☞ pg. 19).
•Change the setting of the Power Dial.
15.•Turn off Sepia and Monotone (☞ pg. 44).
16.•Turn off Sepia, Monotone or Slow before adding Dissolve to a scene transition (☞ pg. 44).
•Make sure that the Squeeze mode in the Recording Menu is set to “OFF”
(☞ pg. 34).
•Make sure you have selected the P.AE/Effects you want before starting editing (☞ pg. 44).
17.
CONTINUED ON NEXT PAGE