EN
51
Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.
PLAYBACK EFFECT
4OFF
1
CLASSIC FILM
2B/W MONOTONE
3
SEPIA
4
STROBE
PLAYBACK EFFECT
Select Menu
Remote sensor
Power Dial
| M |
A | 5S |
OFF |
|
Y |
|
A |
|
L |
|
P |
|
Lock button
T W
EFFECT
Play button
PLAY
EFFECT ON/OFF
1 START PLAYBACK Press the Play button (4).
2 ACCESSMENU PLAYBACK EFFECT SELECT
Point the remote control at the camcorder’s remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.
3 SELECT PLAYBACK EFFECT Move the pointer and highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.
NOTES:
●To deactivate the selected effect, press EFFECT ON/OFF on the remote control. Pressing it again
●Repeat from step 2 when you want to change the selected effect.
●When “MONOTONE” or “SEPIA” is activated, the
“MULTI 4” and “MULTI 9” Snapshot modes (☞ pg. 29) are not available.
The effects that can be used during playback are Classic Film, Monotone, Sepia and Strobe. The effects work the same in playback as they did in recording. Refer to page 42 for more information.
