10
EN
GETTING
STARTED
(Cont.)
Indoor Use
When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.
|
| Power lamp |
|
Slide down the | When power is | To AC outlet | |
supplied, the | |||
open switch. | power lamp lights. |
| |
Remove. |
|
|
|
| To DC |
| Power cord |
|
|
| |
| OUT |
|
|
DC cord | jack |
|
|
| AC Charger Station | ||
Coupler |
| ||
Core filter |
| ||
|
|
| |
1
2
CONNECT DC CORD TO CAMCORDER
Insert the coupler of the provided DC cord into the camcorder.
CONNECT DC CORD TO AC CHARGER STATION
Connect the DC cord to the AC Charger Station’s DC OUT jack.
3 SUPPLY POWER TO AC CHARGER STATION
Plug the AC Charger Station’s power cord into an AC outlet.
NOTE:
Since the AC Charger Station processes electricity internally, it becomes warm during use. Be sure to use it only in
Using The Battery Holder
For extended use, prepare the Battery Holder
Camcorder connector
Nub
Mark
Camcorder lock lever (with release button)
Battery lock switch
Battery
INSERT CHARGED BATTERY | |
1 To insert a battery pack, slide the battery lock | |
switch to the release position and insert the | |
battery | end first. To prevent the battery pack |
from falling out, be sure to slide the battery lock switch to the lock position.
2 ATTACH TO CAMCORDER
Insert the Battery Holder’s nub into the mounting socket on the bottom of the camcorder and slide the camcorder lock lever to the lock position.
•To detach the camcorder, press the release button on the lock lever and slide the lock lever to the release position. Then slide the battery lock switch to the release position.
NOTES:
●When the battery remaining power indicator appears
as 
, that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.
●Each time you start shooting, the camcorder chooses the battery pack that has more remaining power, and uses that as the power supply. That means both battery packs will be exhausted at roughly the same time.
