JVC GRDVL140 specifications Select Scenes, Cancelled and editing will not take place

At the beginning of the scene, press IN/OUT on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

At the end of the scene, press IN/OUT. The Edit-Out position appears in the Random Assemble Editing Menu.

Programme
			I N	OUT MODE	Random Assemble
	1 – –		– – : – –	~	Editing Menu
2				~
3				~
4				~
5				~
6				~
7				~
8				~
		T I ME	CODE	– – : – –
		TOTAL		0 0 : 0 0

Remote sensor

EN47

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press ON/OFF on the remote control.

The Random Assemble Editing Menu appears.

5

6

7 Repeat steps 5 and 6 to register additional scenes.

•To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

NOTES:

REW PLAY

FF

● When choosing a scene, set Edit-In and Edit-Out points

so that there is a relatively large difference between

them.

● If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be

cancelled and editing will not take place.

● If there are blank portions before or after the Edit-In and

Edit-Out points, a blue screen may be included in the

edited version.

● Since time codes register time only as accurately as

seconds, the time code total time may not match the

total programme time exactly.

● Turning off the camcorder’s power erases all registered

IN/OUTON/OFF

CANCEL

RM-V700U

(optional)

Edit-In and Edit-Out points.

● It is not possible to use Fade/Wipe effects and Pro-

gramme AE with special effects during Random

Assemble Editing using a DV cable.

CONTINUED ON NEXT PAGE